D-Link Nuclias Connect Hub Plus DNH-200 User Manual Download Page 62

Page: 62 / 141

Nuclias Connect Hub Plus User Manual

AP Network

delete it from the list.

EAP Method

Specify one or more EAP methods and its

Authentication

ID and Parameter type.

RFC 4282

Enable or disable RFC 4282 for user identification.

3gpp Cellular Network

Specify a list of the 3GPP cellular networks available
through the AP. Specify the MCC and MNC, then click

Add

You can also delete it from the list.

Connection Capability

Specify a list of common IP protocols (TCP, UDP, ICMP) and
port number and the status of the IP protocol, then click

Add

You can also delete it from the list.

Operator Friendly Name

Identify the Hotspot venue operator and choose its
language.

OSU SSID

Specify Online Sign-up (OSU) SSID name. It allows a
mobile client to choose an available online service and
sign up for the online service.

OSU Server URI

Specify OSU Server URI.

OSU Method

Specify a list of OSU methods with its language and the
method name, then click

Add

. You can also delete it from

the list.

OSU Config

Choose the OSU Configuration

OSU Language Code

Choose a language.

OSU Friendly Name

Choose a language and specify the OSU friendly name.

OSU Nai

Specify the OSU

Network Access Identifier (NAI)

OSU Service Description

Enter a service description for the OSU.

OSU Icon Language Code

Specify the language of the icon.

OSU Icon File Path

Specify the location of the icon file.

OSU Icon File Name

Specify the icon’s file name.

OSU Icon Width

Specify the width of the icon in pixels.

OSU Icon Height

Specify the length of the icon in pixels.

OSU Icon Type

Specify the icon’s file type.

Note:

Hotspot 2.0 is only available for compatible models and specific firmware versions.

Click

Add

to save the values and update the screen. Click

Clear

to reset all settings.

Once the settings are updated, the configuration must be uploaded to the access points.
See

Profile Settings

for more information.

VLAN

The VLAN page allows you to create virtual LAN subnets of a physical network. Navigate to

Summary of Contents for Nuclias Connect Hub Plus DNH-200














































































































































Search results

Summary of Contents for Nuclias Connect Hub Plus DNH-200

Reviews:

Related manuals for Nuclias Connect Hub Plus DNH-200

Brands by name

Popular brands

D-Link Nuclias Connect Hub Plus DNH-200, User Manual

Search results

Summary of Contents for Nuclias Connect Hub Plus DNH-200

Reviews:

Related manuals for Nuclias Connect Hub Plus DNH-200

Brands by name

Popular brands