GLV-540 User Manual
54
Feature Access Keys
Many features are accessible through key sequence and soft keys in the
phone. The key sequences to access the features have the form
<HookFlash> + Feature Code + Option or
<AccessCode> + Feature Code + Option
Access
Code
Type
This field defines type for the access Code. Selecting to Hook
Flash will gray out Access Code field and the features can be
initiated with Hook flash.
Value Range
: <String>, <HookFlash>
Default Value: <String>
Access Code
This field specifies the key sequence used to uniquely
identify the feature access keys
and it is editable only when
the Access Code Type is “String”.
This access code with
feature’s key sequence will uniquely identify any Feature.
Value Range:
The possible values are *, #, maximum 5
digits.
Default Value
:’*’
Note
:
Character at “Dial termination” and Access Code are not
allowed to have the same configured value.
Access Keys
Dialing
Here a user can configure weather to use Access keys dialing
or not.
Value Range:
<Enable>, <Disable>
Default Value
:<Enable>
Device Configuration: Dial Termination
Inter Digit
Timeout
This is the maximum time to wait in between digits while
dialing the number. After this timeout the collected digits will
be dialed out.
Value Range:
1 to 120 seconds
Default Value
: 5 seconds
Character
Termination
Here user can configure if any special DTMF key like '* or #
to identify end of dialing. Note that Inter Digit timeout will
be always active.
Value Range
: <Enable>, <Disable>
Default Value
: <Enable>
Character
This character identifies end of dial or end of string input.
Note:
This field and “Access Code” are not allowed to have the
same configured value.
Value Range
: <#>, <*>
Default Value
: <#>
