GLV-540 User Manual
32
5.1.2
User Mode
GLV-540 can operate in any one of the following modes:
o
Single User Mode
o
Multiple User Mode
Single User Mode
:
In this mode only one User profile can operate at a time.
Only one user profile can have user status as
AVAILABLE
and the same user
will be the default/current user. Calls can be initiated and received only for
the default user. All other users will be having user status as
UNAVAILABLE
.
Multiple User Mode:
In this mode GLV can be used by more than one user
profile simultaneously. Multiple user profiles can have user status as
AVAILABLE
and one of the
AVAILABLE
users can be set as default/current
user. Calls can be initiated and received for all user profiles that have user
status
AVAILABLE
.
5.1.3
User Status
A configured
user profile
can be used only if its
user status
is “
AVAILABLE”.
User status can have either of the following values:
o
“
AVAILABLE
”: user profile with user status “
AVAILABLE”
can be used
to initiate and receive calls. Phone will initiate SIP registration for
“
AVAILABLE”
users only.
o
“
UNAVAILABLE
”: user profile with user status “UN
AVAILABLE”
cannot
initiate or receive calls.
User Status of a user profile can be modified either through Web or LCD
interface. Logging into a user profile through the LCD will update user status
to “AVAILABLE”. Similarly logging out of a user profile through LCD changes
the user status to “UNAVAILABLE”.
Note
:
Logging in through Web browser does not change the user status. To change
user status through the Web, update user status field in “User configuration”
web page and save the phone configuration.
5.1.4
Default User
One of the configured user profiles needs to be set as the default/current user
profile. All outgoing calls will use default/current user profile. All information
displayed on the LCD will be with respect to
Default
user profile, i.e. Phone
book, speed dial etc.
For example
: Consider a user profile “user 1” as the default user profile, it is
associated with SIP account “Account 1”. When any line (L1/ L2 / L3) is
selected, then the call is made using the SIP server configured in SIP account
“Account 1”.
To set the default/current user profile:
o
Press the “USER” key on the keypad, when the phone is idle (not in
call) and the handset is on-hook.
o
Select a user profile from the list of Users displayed on the LCD.
Enter the selected user profile password to confirm the selection of the
default/current user profile.
Note:
Selecting a user profile as default/current user will automatically set the
corresponding user status to “AVAILABLE”
