D-Link GLV-540, User Manual

Page: 70 / 117

GLV-540 User Manual
70
Set as
Current User
Though the phone will receive calls for all available users,
only one user (current user) will appear as owner of the IP
phone. All outgoing calls from the IP phone will use current
User configurations by default, unless another user is
selected explicitly while making a call.
This field specifies if this user is the current user of the IP
phone or not.
Value Range
:< Enable> <Disable>
Default Value : <Enable >
User Status
This feature helps a user when he wants to use this IP phone
to make and receive calls. To use the phone for making or
receiving the calls, that user should be “Available”
. Only
available users will be registered by the phone. “Not
Available” user will be unregistered and cannot make or
receive any calls.
When a current User is set as unavailable,
the next available user will be set as current User.
Value Range
: <Available>, <Not Available>
Default Value : <Available>
Registration
Status This field shows the SIP Registration status of the selected
user.
Table 11: User Configuration: - Features
User Configuration : Features
User ID
This is a drop down list to select the User ID for which the
Feature settings will be shown. Admin can select any User
ID to configure the user feature settings.
Value Range
: Available User ID’s List
Default Value :User1
Ringer Type
This field is the drop down list of available Ring ID’s. The
user can select a ring type for his incoming calls. However, if
the caller has been assigned any specific ring, that will take
precedence over this feature. For downloading the Custom
Ring, refer to “Device Management / Configuration” page.
Value Range
: <Ring1> <Ring2> <Ring3> <Custom Ring>
Default Value :< Ring1>
Auto Answer
Enable this field for automatically accepting the incoming call
for the above User ID if he is current User of the phone.
Value Range
: <Enable> <Disable>
Default Value : <Disable>
Auto Answer
After
This field specifies the number of rings after which the call to
be answered.
Value Range:
0-9
Default Value: 2
Note : To work this feature, please ensure that this
configured number of rings including with its ring‘s
timeout should be less than the configured Alert Timeout.