GLV-540 User Manual
84
Table 17: Device Management: Configuration
Device Management: Configuration
Download tones to Phone
This section allows you to download the sound files from your PC to be played
for tones. This section is enabled only when you logged in with ADMIN
privilege, user with user privilege does not have permissions for downloading.
At any time only one Sound File is available for each Tone, downloading once
again would replace the existing sound file.
Data
This is a drop down list which allows you to download the
Sound file for
tone. Either you can download each sound
file separately or you can download the zipped file of all the
sound files. Playing Sound Files can be done at “Device
Configuration” by selecting the Country code to “Others”
and open the “Tone Configuration” page
.
Value Range:
<MOH> <MWI> <Ring Tone> <Dial Tone>
<Busy Tone> <Ring back Tone> <Progress Tone> <Error
Tone> <All> <None>
Default Value
: <MOH>
Filename
This specifies the zip file name of the sound file for
downloading. This data file should be in .wav format with
G.711A or G.711U encoded samples.
Value Range:
File Name with Path, max 125 chars.
Default Value
:
Download
Click on this button to start the downloading of the sound
file from your PC. It opens an “Operation in Progress” page
which shows the status of the downloading process. You
can’t open any other page and no other operation is allowed
till this process is complete.
Restore Configuration to Phone
This section allows you to restore the configuration from your PC. Admin can
restore
the
complete
system
configuration
and
all/any
user
configurations. R&D
user
can
restore
the
complete
factory
reset
configurations. Other users can only restore his specific configurations, not
the system configurations.
User Id
Admin can select any of the user or Admin. Selecting Admin
will restore the complete system configuration and all user
configurations as well. Selecting as User will restore only the
user specific configuration.
Value Range:
<Admin> & List of available users.
Default Value
:User1
Filename
This specifies the file name to be used for restoring the
configuration.
Value Range:
File name with the Path, max 125 chars.
Default Value
:
Restore
Click on this button to download the configured filename
from your PC. After this is initiated, you will get “Operation
in Progress” page to show the restore configuration
operation status. You are not allowed to perform any
operation from the GUI till this process is complete. After
some time you will get Success or Failure Message. If it is
success Phone will restart else it will redirect to Home Page.
