GLV-540 User Manual
55
Device Configuration : Timeouts
Max Call
Duration
Maximum call duration after a call will be automatically
disconnected to avoid any misuse and unexpected lockup.
Value Range:
0 to 3600 in seconds.
Default Value
: 0
Note
: Value 0 to mean that Maximum Call duration is
disabled
Web Auto
Logoff
Period
If GUI session is left idle for the time as configured in this
field then it will automatically log off. After this time the user
should re-login.
The following points to remembered when using this field.
Simultaneous accessing of GUI & LCD is not possible.
Only one user can access the Phone through GUI at any
time. This applies even to logged in user with Admin
privilege or User privilege.
User Closing the GUI access page without Logging out,
needs to wait till this “Auto Logoff Period” to login again.
Value Range
: 1 to 30 minutes.
Default Value
: 10 minutes
Dial Tone
Timeout
This is the maximum time to wait for user to dial any key
after going off hook. After this timeout error tone is played
to user.
Value Range
: 5 to 120 Seconds
Default Value
: 30 Seconds
Progress
Timeout
This is the maximum time to wait to get any response from
other end after dialing out. During this period, progress tone
is played and after timeout error tone is played to user
.
Value Range
: 5 to 120 Seconds
Default Value
: 45 Seconds.
Alert Tone
Timeout
This is the maximum time to play the ring tone for the
Incoming call when phone is on-hook.
Value Range
: 5 to 120 seconds
Default Value
: 60 Seconds
Note
: To work this feature, please ensure that this timeout
should be greater than the configured “Auto Answer After”
ring timeout
No Answer
Timeout
This is the maximum time for the remote party to answer
the call and ring back tone is played during this period.
Value Range
: 5 to 120 seconds.
Default Value
: 60 seconds
