D-Link DXS-3250E - xStack Switch, Web/Installation Manual

Page: 73 / 424

DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide
Page 72
Switching between the Stacking Master and the Secondary Master results in a limited service loss. Any dynamic
tables are relearned if a failure occurs. The running configuration file is synchronized between Stacking Master
and the Secondary Master, and continues running on the Secondary Master.
Defining Stacking
The Stack Page allows network managers to either reset the entire stack or a specific device. Device configuration
changes that are not saved before the device is reset are not saved. If the Stacking Master is reboot, the entire
stack is reboot. To open the
Stack Page :
1. Click System > General . The Stack Page opens .
Figure 34: Stack Page
The Stack Page
contains the following fields:
•
Top Unit — Indicates the top most stacking member’s number. Possible values are Master and 1-6.
•
Bottom Unit — Indicates the lower most stacking member’s number. Possible values are Master and 1-6.
•
Stack Order — Displays the stacking member’s stack order.
•
Neighbor 1 — Displays the stacking member’s neighbor order.
•
Neighbor 2 — Displays the stacking member’s neighbor order.