D-Link DXS-3250E - xStack Switch Web/Installation Manual Download Page 179

Page: 179 / 424

DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide

Page 178

VLAN Membership Table

In addition to the fields above, the following fields appear in the VLAN Membership Table:

•

Port

— Indicates the port membership. The possible VLAN Membership settings are:

–

Untagged (Brown)

— Indicates the port is an untagged VLAN member. Packets forwarded by the

interface are untagged.

–

Tagged (Red)

— Indicates the port is a tagged member of a VLAN. All packets forwarded by the interface

are tagged. The packets contain VLAN information.

–

Excluded (Gray)

— Excludes the port from the VLAN. However, the interface can be added to the VLAN

through GARP.

–

Forbidden (Purple)

— Denies the port VLAN membership, even if GARP indicates the port is to be

added.

•

LAG

— Indicates the LAG membership. The possible VLAN Membership settings are:

–

Untagged (Brown)

— Indicates the LAG is an untagged VLAN member. Packets forwarded by the

interface are untagged.

–

Tagged (Red)

— Indicates the LAG is a tagged member of a VLAN. All packets forwarded by the

interface are tagged. The packets contain VLAN information.

–

Exclude (Gray)

— Excludes the LAG from the VLAN. However, the interface can be added to the VLAN

through GARP.

–

Forbidden (Purple)

— Denies the LAG VLAN membership, even if GARP indicates the port is to be

added.

Summary of Contents for DXS-3250E - xStack Switch








































































































































































































































































































































































































































Search results

Summary of Contents for DXS-3250E - xStack Switch

Reviews:

Related manuals for DXS-3250E - xStack Switch

Brands by name

Popular brands

D-Link DXS-3250E - xStack Switch, Web/Installation Manual

Search results

Summary of Contents for DXS-3250E - xStack Switch

Reviews:

Related manuals for DXS-3250E - xStack Switch

Brands by name

Popular brands