manualshive.com logo in svg

D-Link DWS-4026, User Manual

Share
Download
D-Link DWS-4026 User Manual Download Page 86

D-Link Unified Access System

Software User Manual

12/10/09

Page 86

Managing Logs

Document

34CSFP6XXUWS-SWUM100-D7

This log message has a severity level of 7 (15 mod 8), which is a debug message. The message was generated by the MSTP
component running in thread id 2110. The message was generated on August 24 05:34:05 by line 318 of file mstp_api.c.
This is the 237

th

 message logged with system IP 0.0.0.0 and unit number 1.

•

Click 

Refresh

 to update the page with the latest messages.

C

OMMAND

 L

OGGER

 C

ONFIGURATION

Use the Command Logger Configuration page to enable the system to log all CLI commands issued on the system. The
command log messages are interleaved with the other system logs messages.

To access the Command Logger Configuration page, click 

LAN > Administration > Log > Command Logger

Configuration

 in the navigation menu.

Figure 32:  Command Logger Configuration

•

If you change the administrative mode, click 

Submit

 to apply the change to the system.

C

ONSOLE

 L

OG

 C

ONFIGURATION

Use the Console Log Configuration page to control logging to any serial device attached to the switch.

To access the Console Log Configuration page, click 

LAN > Administration > Log > Console Log Configuration 

in the

navigation menu.

Table 24:  Command Logger Configuration Fields

Field

Description

Admin Mode

This field determines whether to log CLI commands in the system log file.

• Enable

: The system logs CLI commands. The commands appear in messages on the 

Buffered Log page. For example, the following log messages shows when the CLI 
command 

show logging buffered

 was issued, from which IP address the 

command was issued, and the name of the user who issued the command:

<5> NOV 29 22:25:00 10.254.24.172-1 UNKN[243420816]:
cmd_logger_api.c(87) 34 %% CLI:10.254.24.65:admin:show
logging buffered

• Disable

: This system does not log CLI commands.

Summary of Contents for DWS-4026

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands