manualshive.com logo in svg

D-Link DWS-4026, User Manual

Share
Download
D-Link DWS-4026 User Manual Download Page 244

D-Link Unified Access System

Software User Manual

12/10/09

Page 244

Viewing Multicast Forwarding Database Information

Document

34CSFP6XXUWS-SWUM100-D7

MFDB MLD S

NOOPING

 T

ABLE

Use the MLD Snooping Table page to view all of the entries in the Multicast Forwarding Database that were created for MLD
Snooping.

To access the MLD Snooping Table page, click 

LAN > Monitoring

 

> Multicast Forwarding Database > MLD Snooping

Table 

in the navigation tree.

Figure 165:  MFDB MLD Snooping Table

•

Click 

Refresh

 to update the information on the screen with the most current data. 

•

Click 

Clear Entries

 to tell the MLD Snooping component to delete all of its entries from the multicast forwarding

database.

MFDB S

TATISTICS

Use the multicast forwarding database Stats page to view statistical information about the MFDB table.

To access the Stats page, click 

LAN > Monitoring > Multicast Forwarding Database > Statistics 

in the navigation tree.

Table 148:  MLD Snooping Table Fields

Field

Description

MAC Address

A VLAN ID/multicast MAC address pair for which the switch has forwarding and or 
filtering information. The format is 8 two-digit hexadecimal numbers that are separated 
by colons, for example, 00:01:23:45:67:89:AB:CD.

Type

This displays the type of the entry. Static entries are those that are configured by the 
end user. Dynamic entries are added to the table as a result of a learning process or 
protocol.

Description

The text description of this multicast table entry. Possible values are Management 
Configured, Network Configured and Network Assisted.

Slot/Port

The list of interfaces that are designated for forwarding (Fwd) and filtering (Flt) for the 
associated address.

Summary of Contents for DWS-4026

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands