D-Link DWS-4026 User Manual Download Page 549

Page: 549 / 576

Software User Manual

D-Link Unified Access System

12/10/09

Document

34CSFP6XXUWS-SWUM100-D7

Configuring 802.1X Network Access Control

Page 549

Configure the RADIUS accounting server information.

a. Go to the

LAN > Security > RADIUS > Accounting Server

page.

b. Select Add from Accounting Server Host Address field.

c. Enter 10.10.10.10 in the Accounting Server Host Address field.

d. Click

Submit

e. in the Secret field, enter secret and select the Apply option.

Click

Submit

To enable the RADIUS accounting mode, go to the

LAN > Security > RADIUS > RADIUS Configuration

page, select

Enable from the Accounting Mode menu, and then click

Submit

Create an authentication list.

a. Go to the

LAN > Administration > Authentication List Configuration

page.

b. Enter radiusList in the Authentication List Name field.

c. Click

Submit

d. Select RADIUS from the Method 1 menu, and then click

Submit

To set radiusList as the default login list for users that are not configured on the system, go to the

LAN > Security > Port

Access Control > Login

page, select radiusList from the Login field, and click

Submit.

To enable IEEE 802.1X authentication on the switch, go to the

LAN > Security > Port Access Control > Configuration

page, select Enable from the Administrative Mode menu, and then click

Submit

To set the 802.1X mode for port 1/0/1, go to the

LAN > Security > Port Access Control > Port Configuration

page,

select Force Authorized from the Control Mode field, and then click

Submit

Summary of Contents for DWS-4026
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DWS-4026

Reviews:

Brands by name

Popular brands

D-Link DWS-4026, User Manual

Search results

Summary of Contents for DWS-4026

Reviews:

Brands by name

Popular brands