manualshive.com logo in svg

D-Link DWS-4026, User Manual

Share
Download
D-Link DWS-4026 User Manual Download Page 187

Software User Manual

 D-Link Unified Access System

12/10/09

Document

34CSFP6XXUWS-SWUM100-D7

Managing VLANs

Page  187

Figure 111:  VLAN Configuration

Table 96:  VLAN Configuration Fields

Field

Description

VLAN ID and Name

You can use this screen to reconfigure an existing VLAN, or to create a new one. Use 
this pulldown menu to select one of the existing VLANs, or select 

Create

 to add a new 

one.

VLAN ID-Individual

Specify the VLAN Identifier for the new VLAN. (You can only enter data in this field 
when you are creating a new VLAN.) The range of the VLAN ID is (1 to 3965).

VLAN ID-Range

Specify the range of VLAN Identifiers for the new VLANs to be created.

VLAN Name

Use this optional field to specify a name for the VLAN. It can be up to 32 alphanumeric 
characters long, including blanks. The default is blank. VLAN ID 1 is always named 
“Default.”

VLAN Type

This field identifies the type of the VLAN you are configuring. You cannot change the 
type of the default VLAN (VLAN ID = 1): it is always type “Default.” When you create 
a VLAN, using this screen, its type will always be “Static.” A VLAN that is created by 
GVRP registration initially has a type of “Dynamic.” You can use this pulldown menu 
to change its type to “Static.”

Slot/Port

Indicates which port is associated with the fields on this line.

Status

Indicates the current value of the participation parameter for the port.

Participation

Use this field to specify whether a port will participate in this VLAN. The factory default 
is “Autodetect.” The possible values are:

• Include

: This port is always a member of this VLAN. This is equivalent to registration 

fixed in the IEEE 802.1Q standard.

• Exclude

: This port is never a member of this VLAN. This is equivalent to registration 

forbidden in the IEEE 802.1Q standard.

• Autodetect

: Specifies that port may be dynamically registered in this VLAN via 

GVRP. The port will not participate in this VLAN unless it receives a GVRP request. 
This is equivalent to registration normal in the IEEE 802.1Q standard.

Tagging

Select the tagging behavior for this port in this VLAN. The factory default is 
“Untagged.” The possible values are:

• Tagged

: all frames transmitted for this VLAN will be tagged.

• Untagged

: all frames transmitted for this VLAN will be untagged.

Summary of Contents for DWS-4026

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands