D-Link DSL-6740U User Manual Download

Page: 110 / 158

DSL-6740U

VDSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

The following fields are available on the page:

Parameter

Description

Beacon Period

The time interval (in milliseconds) between packets sent to synchronize
the wireless network.

RTS Threshold

The minimum size (in bites) of a packet for which an RTS frame is
transmitted.

Frag Threshold

The maximum size (in bites) of a non-fragmented packet. Larger packets
are fragmented (divided).

DTIM Period

The time period (in seconds) between sending a DTIM (a message
notifying on broadcast or multicast transmission) and data transmission.

TX Power

The router's transmit power (in percentage terms).

Bandwidth

Channel bandwidth for 802.11n devices.

TX Preamble

This parameter defines the length of the CRC block sent by the router
when communicating to wireless devices.

Select a value from the drop-down list.

Long Preamble

Short Preamble

(this value is recommended for networks with high-

volume traffic).

When you have configured the parameters, click the

Change

button.

Page

110

of 158

Summary of Contents for DSL-6740U































































































































































Search results

Summary of Contents for DSL-6740U

Reviews:

Related manuals for DSL-6740U

Brands by name

Popular brands

D-Link DSL-6740U, User Manual

Search results

Summary of Contents for DSL-6740U

Reviews:

Related manuals for DSL-6740U

Brands by name

Popular brands