DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
LAN
To configure the router's local interface, proceed to the
Net / LAN
page.
Figure 70. Basic settings of the local interface.
If needed, edit the basic parameters of the local interface.
Parameter
Description
IP Address
The IP address of the router in the local subnet. By default, the
following value is specified:
192.168.1.1
.
Netmask
The mask of the local subnet. By default, the following value is
specified:
255.255.255.0
.
On the page, you can also specify parameters for the additional local subnet.
Figure 71. Configuring parameters for the additional local subnet.
Parameter
Description
IP Address 2
An alias IP address of the router's IP address.
Netmask 2
A mask of the additional local subnet.
NAT 2
Select the checkbox if you want one WAN IP address to be used for
all computers of the additional local subnet. For the main local
subnet, you can select the
NAT
checkbox while creating WAN
connection via the
Click'n'Connect
Wizard or on the
Net / WAN
page.
Firewall 2
Select the checkbox to enable protection against ARP and DDoS
attacks for all computers of the additional local subnet. For the main
local subnet, you can select the
Firewall
checkbox while creating
WAN connection via the
Click'n'Connect
Wizard or on the
Net /
WAN
page.
When needed settings are configured, click the
Save
button.
Page
94
of 158
