DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
IPoA or Static IP Connection
Figure 31. Configuring Static IP WAN connection.
In the
Connection name
field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the
VPI
and
VCI
fields.
Fill in the
IP Address
and
Netmask
fields.
In the
Gateway IP address
field, enter the IP address of the gateway used by this WAN
connection.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page. After switching to the expert settings mode, the following sections
are displayed:
ATM
(for ADSL WAN connection),
Ethernet
(for Ethernet WAN connection),
IP
,
Miscellaneous
, and
VLAN
.
Page
44
of 158
