DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Operation Guidelines
11. Go to the
Advanced / Interface grouping
page.
12. Create a group containing the WAN connection of the Bridge type and the LAN 2 port.
13. Create another group containing the WAN connection of the Dynamic IP type, the LAN 3
port, and the wireless interface.
Figure 112. Groups of ports for the created WAN connections.
14. Save the router's settings.
ADSL WAN Connections
In some cases, it is necessary to assign two WAN connections (of the Bridge/Static IP/Dynamic IP
type) to one virtual channel (that is, to specify the same values of the VPI/VCI).
For example, your ISP provides the IPTV service (VPI = 0, VCI = 35). You need to configure a
WAN connection of the Bridge type for the set-top-box connected to the LAN 2 port of the router
and a WAN connection of Dynamic IP type for the computer connected to the LAN 3 port of the
router and the laptop connected to the wireless interface of the router.
To configure the router, follow the steps below:
1. Go to the
Net / WAN
page and click the
Add
button.
2. Select the
Bridge
value from the
Connection Type
drop-down list.
3. Select the
DSL(new)
value from the
Interface
drop-down list.
4. Fill in the
VPI
and
VCI
fields.
5. In the
VLAN
section, select the
Allow to create several connections assigned to
this port
checkbox.
6. Click the
Save
button.
7. Click the
Add
button again.
8. Select the
Dynamic IP
value from the
Connection Type
drop-down list.
9. Select the
atm1(0/35)
value from the
Interface
drop-down list.
10. Click the
Save
button.
Figure 113. Two WAN connections with the same values of the VPI and VCI.
Page
154
of 158