DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
After specifying the needed parameters, click the
Save
button.
To edit an existing route, select a needed field in the relevant line of the table, change its value, and
click the
Save
button.
To remove an existing route, select the checkbox located to the left of the relevant line in the table
and click the
Save
button.
If you need to specify a host from the LAN as the default route, select the
<Auto>
value from the
Via Interface
drop-down list, enter
0.0.0.0
in the
Destination network
and
Destination
netmask
fields, enter the IP address of the host from the LAN in the
Gateway
field, and then
click the
Save
button.
Page
120
of 158
