DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
Connecting to PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between any of four Ethernet ports located on the back panel of
the router and the Ethernet port of your PC.
3.
To connect the router to a DSL line:
connect a phone cable between the DSL port of the
router and the
MODEM
port of the splitter. Connect your phone to the
PHONE
port of the
splitter. Then connect another phone cable between a phone jack and the
LINE
port of the
splitter.
4.
To connect the router to an Ethernet line:
connect the Ethernet cable between any of four
Ethernet ports located on the back panel of the router and the Ethernet line.
5. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
6. Turn on the router by pressing the
ON/OFF
button on its left side panel.
7. Turn on your PC and wait until your operating system is completely loaded.
Page
16
of 158