DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
NTP Client
On the
System / NTP client
page, you can manually set the time and date of the router or
configure automatic synchronization of the system time with a time server on the Internet.
Figure 109. The
System / NTP client
page.
To set the system time manually, select the
Manual
value from the
Mode
drop-down list and set
the time and date in the fields displayed. Then click the
Change
button.
To enable automatic synchronization with a time server, follow the next steps:
1. Select the
NTP
value from the
Mode
drop-down list.
2. Select your time zone from the drop-down list. To set the time zone in accordance with the
settings of your operating system, click the
Determine timezone
button in the bottom
right corner of the page.
3. Specify the needed NTP server in the
NTP servers
field or leave the server specified by
default.
4. Click the
Change
button.
!
When the router is powered off or rebooted, the system time is reset to the default value.
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Inter
net. If you have set the system time
manually, you need to set the time and date again (see above).
Page
149
of 158
