D-Link DSL-6740U User Manual Download

Page: 124 / 158

DSL-6740U

VDSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

TR-069 Client

On the

Advanced / TR-069 Client

page, you can configure the router for communication with a

remote Auto Configuration Server (ACS).
The TR-069 client is used for remote monitoring and management of the device.

Figure 92. The page for configuring the TR-069 client.

You can specify the following parameters:

Parameter

Description

Interface

The interface which the router uses for communication with the
ACS. You can select the local interface (the

LAN

value), any

existing WAN connection (the

ANY WAN

value) or one WAN

connection.

Inform settings

Enable

Select the checkbox so the router may send reports (data on the
device and network statistics) to the ACS.

Interval

Specify the time period (in minutes) between sending reports.

Auto Configuration Server settings

URL address

The URL address of the ACS provided by the ISP.

Page

124

of 158

Summary of Contents for DSL-6740U































































































































































Search results

Summary of Contents for DSL-6740U

Reviews:

Related manuals for DSL-6740U

Brands by name

Popular brands

D-Link DSL-6740U, User Manual

Search results

Summary of Contents for DSL-6740U

Reviews:

Related manuals for DSL-6740U

Brands by name

Popular brands