manualshive.com logo in svg

D-Link DGS-3120-24PC-EI, Product Manual

The D-Link DGS-3120-24PC-EI is a high-performance switch designed for reliable and efficient network connectivity. With advanced features and 24 power-over-Ethernet ports, this product delivers exceptional performance. Visit our website to easily access the free product manual and download it, ensuring you can make the most of this powerful switch.

Share
Download
background image

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide 

323 

 

  

Logout through Web(SSL) 

Logout through Web(SSL) (Username: 
<username>, IP: <ipaddr>) 

Informational 

  

  

Web(SSL) session timed out    

Web(SSL) session timed out (Username: 
<username>, IP: <ipaddr> ) 

Informational 

  

Telnet 

Successful login through Telnet 

Successful login through Telnet (Username: 
<username>, IP: <ipaddr>) 

Informational 

  

  

Login failed through Telnet     

Login failed through Telnet (Username: 
<username>, IP: <ipaddr> ) 

Warning 

  

  

Logout through Telnet           

Logout through Telnet (Username: 
<username>, IP: <ipaddr>) 

Informational 

  

  

Telnet session timed out        

Telnet session timed out (Username: 
<username>, IP: <ipaddr>) 

Informational 

  

SNMP 

SNMP request received with 
invalid community string  

SNMP request received from <ipAddress> 
with invalid community string! 

Informational 

  

STP 

Topology changed                   

Topology changed 
(Instance:<InstanceID> ,Port:<[unitID:]portNu
m>,MAC:<macaddr>) 

Informational 

  

  

New Root selected                  

[CIST | CIST Regional | MSTI Regional]  New 
Root bridge selected( [Instance: 
<InstanceID> ]MAC: <macaddr> 
Priority :<value>) 

Informational 

  

  

Spanning Tree Protocol is 
enabled  

Spanning Tree Protocol is enabled 

Informational 

  

  

Spanning Tree Protocol is 
disabled 

Spanning Tree Protocol is disabled 

Informational 

  

  

New root port 

New root port selected 
(Instance:<InstanceID>, 
port:<[unitID:]portNum>) 

Notice 

  

  

Spanning Tree port status 
changed 

Spanning Tree port status change 
(Instance:<InstanceID> , 
Port:<[unitID:]portNum>) <old_status> -> 
<new_status> 

Notice 

  

  

Spanning Tree port role 
changed 

Spanning Tree port role change 
(Instance:<InstanceID> , 
Port:<unitID:portNum>) <old_role> -> 
<new_role> 

Informational 

  

  

Spanning Tree instance created 

Spanning Tree instance created  
(Instance:<InstanceID>) 

Informational 

  

  

Spanning Tree instance deleted 

Spanning Tree instance deleted 
(Instance:<InstanceID>) 

Informational 

  

  

Spanning Tree Version changed 

Spanning Tree version change (new 
version:<new_version>) 

Informational 

  

  

Spanning Tree MST 
configuration ID name and 
revision level changed 

Spanning Tree MST configuration ID name 
and revision level change 
(name:<name> ,revision level 
<revision_level>). 

Informational 

  

  

Spanning Tree MST 
configuration ID VLAN mapping 
table deleted 

Spanning Tree MST configuration ID VLAN 
mapping table change (instance: <InstanceID> 
delete vlan <startvlanid> [- <endvlanid>]) 

Informational 

  

  

Spanning Tree MST 
configuration ID VLAN mapping 
table added 

Spanning Tree MST configuration ID VLAN 
mapping table change (instance: <InstanceID> 
add vlan <startvlanid> [- <endvlanid>]) 

Informational 

  

DoS 

Spoofing attack 
  1. The source IP is same as 
switch's interface IP but the 
source Mac is different 
  2. Source IP is the same as the 
switch's IP in ARP packet 
  3. Self IP packet detected 

Possible spoofing attack from IP: <ipaddr>, 
MAC: <macaddr>, Port: <[unitID:]portNum> 

Critical 

  

SSH 

Successful login through SSH     

Successful login through SSH (Username: 
<username>, IP: <ipaddr> ) 

Informational 

  

  

Login failed through SSH     

Login failed through SSH (Username: 
<username>, IP: <ipaddr>, ) 

Warning 

  

  

Logout through SSH           

Logout through SSH (Username: <username>, 
IP: <ipaddr> ) 

Informational 

  

  

SSH session timed out        

SSH session timed out (Username: 
<username>, IP: <ipaddr>) 

Informational 

  

  

SSH server is enabled 

SSH server is enabled 

Informational 

  

Summary of Contents for DGS-3120-24PC-EI




















































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3120-24PC-EI

CALIENT S320 Hardware User'S Manual preview
S320
Brand: CALIENT Pages: 46
CALIENT S320 Getting Started Manual preview
S320
Brand: CALIENT Pages: 42
FANATEC PODIUM Quick Manual preview
PODIUM
Brand: FANATEC Pages: 40
H3C Mini Series Manual preview
Mini Series
Brand: H3C Pages: 17
IDEC HS5L Series Instruction Sheet preview
HS5L Series
Brand: IDEC Pages: 8
IDEM SAFETY SWITCHES MPR Operating Instructions preview
MPR
Brand: IDEM SAFETY SWITCHES Pages: 2
Contemporary Controls EISK5-100T/H Installation Manual preview
EISK5-100T/H
Brand: Contemporary Controls Pages: 4
Cabletron Systems SmartSTACK 100 User Manual preview
SmartSTACK 100
Brand: Cabletron Systems Pages: 110
Omega iServer MicroServer EIS-2B User Manual preview
iServer MicroServer EIS-2B
Brand: Omega Pages: 68
LEGRAND 672 34 Quick Start Manual preview
672 34
Brand: LEGRAND Pages: 4
NA-DE 03009 Manual preview
03009
Brand: NA-DE Pages: 4
LevelOne GSW-1601TX User Manual preview
GSW-1601TX
Brand: LevelOne Pages: 40
Linksys SRW224 - 10/100 - Gigabit Switch Specifications preview
SRW224 - 10/100 - Gigabit Switch
Brand: Linksys Pages: 2
Blackberry SWITCH DEVICE User Manual preview
SWITCH DEVICE
Brand: Blackberry Pages: 10
Gefen GTB-MHDMI1.3-442 User Manual preview
GTB-MHDMI1.3-442
Brand: Gefen Pages: 29
Smart-M DVNET-4Duo User Manual preview
DVNET-4Duo
Brand: Smart-M Pages: 2
Yacoub Automation GmbH SM 4TX2FX User Manual preview
SM 4TX2FX
Brand: Yacoub Automation GmbH Pages: 45
3Com LANPLEX 2500 EXTENDEDPLEX 2500 EXTENDED User Manual preview
LANPLEX 2500 EXTENDEDPLEX 2500 EXTENDED
Brand: 3Com Pages: 186

Brands by name

Popular brands

Load more brands