manualshive.com logo in svg

D-Link DGS-3120-24PC-EI, Product Manual

The D-Link DGS-3120-24PC-EI is a high-performance switch designed for reliable and efficient network connectivity. With advanced features and 24 power-over-Ethernet ports, this product delivers exceptional performance. Visit our website to easily access the free product manual and download it, ensuring you can make the most of this powerful switch.

Share
Download
background image

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide 

328 

 

cleared  

  

Multicast storm occurrence 

Port <[unitID:]portNum> Multicast storm is 
occurring  

Warning 

  

  

Multicast storm cleared 

Port <[unitID:]portNum> Multicast storm has 
cleared  

Informational 

  

  

Port shut down due to a  packet 
storm 

Port <[unitID:]portNum>  is currently shut 
down due to a packet storm 

Warning 

  

Loopback 
Dection 

Port  loop occurred 

Port <[unitID:]portNum> LBD loop occurred. 
Port blocked     

Critical  

   

  

Port  loop detection restarted 
after interval time 

Port <[unitID:]portNum> LBD port recovered. 
Loop detection restarted 

Informational 

  

  

Port with VID  loop occurred 

Port <[unitID:]portNum> VID <vlanID> LBD 
loop occurred. Packet discard begun 

Critical  

  

  

Port with VID Loop detection 
restarted after interval time 

Port <[unitID:]portNum> VID <vlanID> LBD 
recovered. Loop detection restarted 

Informational 

  

  

The number of VLANs that loop 
back has occurred hit the 
specified number. 

Loop VLAN number overflow 

Informational 

  

Gratuitous 
ARP 

Gratuitous ARP  detected 
duplicate IP. 

Conflict IP was detected with this device  (IP: 
<ipaddr>, MAC: <macaddr>, Port 
<[unitID:]portNum>, Interface: <ipif_name>). 

Warning 

  

DHCP 

Detect untrusted DHCP server 
IP address 

Detected untrusted DHCP server(IP: <ipaddr>, 
Port: <[unitID:]portNum>)  

Informational 

DHCP Server 
Screening 

BPDU 
Protection 

BPDU attack happened 

Port <[UnitID:]portNum> enter BPDU under 
attacking state (mode: drop / block / 
shutdown) 

Informational  

  

  

BPDU attack automatically 
recover 

Port <[UnitID:]portNum> recover from BPDU 
under attacking state automatically 

Informational  

  

  

BPDU attack manually recover 

Port <[UnitID:]portNum> recover from BPDU 
under attacking state manually 

Informational  

  

Monitor 

Temperature exceeds 
confidence level 

[Uint <unitID>] Temperature Sensor 
<sensorID> enter alarm state. (current 
temperature: <temperature>) 

Warning 

  

  

Temperature recovers to 
normal. 

[Uint <unitID>] Temperature Sensor 
<sensorID> recovers to normal state. (current 
temperature: <temperature>) 

Informational 

  

CFM 

Cross-connect is detected 

CFM cross-connect. VLAN:<vlanid>, Local(MD 
Level:<mdlevel>, Port <[unitID:]portNum>, 
Direction:<mepdirection>) 
Remote(MEPID:<mepid>, MAC:<macaddr>) 

Critical  

  

  

Error CFM CCM packet is 
detected 

CFM error ccm. MD Level:<mdlevel>, 
VLAN:<vlanid>, Local(Port 
<[unitID:]portNum>, Direction:<mepdirection>) 
Remote(MEPID:<mepid>, MAC:<macaddr>) 

Warning 

  

  

Can not receive remote MEP's 
CCM packet 

CFM remote down. MD Level:<mdlevel>, 
VLAN:<vlanid>, Local(Port 
<[unitID:]portNum>, Direction:<mepdirection>)  

Warning 

  

  

Remote MEP's MAC reports an 
error status 

CFM remote MAC error. MD Level:<mdlevel>, 
VLAN:<vlanid>, Local(Port 
<[unitID:]portNum>, Direction:<mepdirection>)  

Warning 

  

  

Remote MEP detects CFM 
defects 

CFM remote detects a defect. MD 
Level:<mdlevel>, VLAN:<vlanid>, Local(Port 
<[unitID:]portNum>, Direction:<mepdirection>)  

Informational 

  

CFM 
Extension 

AIS condition detected 

AIS condition detected. MD Level:<mdlevel>, 
VLAN:<vlanid>, Local(Port 
<[unitID:]portNum>, Direction:<mepdirection>, 
MEPID:<mepid>) 

Notice 

  

  

AIS condition cleared 

AIS condition cleared. MD Level:<mdlevel>, 
VLAN:<vlanid>, Local(Port 
<[unitID:]portNum>, Direction:<mepdirection>, 
MEPID:<mepid>) 

Notice 

  

  

LCK condition detected 

LCK condition detected. MD Level:<mdlevel>, 
VLAN:<vlanid>, Local(Port 
<[unitID:]portNum>, Direction:<mepdirection>, 
MEPID:<mepid>) 

Notice 

  

  

LCK condition cleared 

LCK condition cleared. MD Level:<mdlevel>, 
VLAN:<vlanid>, Local(Port 
<[unitID:]portNum>, Direction:<mepdirection>, 
MEPID:<mepid>) 

Notice 

  

Summary of Contents for DGS-3120-24PC-EI




















































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3120-24PC-EI

D-Link xStack DGS-3612G series Reference Manual preview
xStack DGS-3612G series
Brand: D-Link Pages: 546
D-Link xStack DGS-3400 Series User Manual preview
xStack DGS-3400 Series
Brand: D-Link Pages: 326
D-Link xStack DGS-3612G series Cli Manual preview
xStack DGS-3612G series
Brand: D-Link Pages: 493
D-Link xStack DGS-3400 Series Cli Reference Manual preview
xStack DGS-3400 Series
Brand: D-Link Pages: 540
D-Link DXS-3326GSR - xStack Switch - Stackable Reference Manual preview
DXS-3326GSR - xStack Switch - Stackable
Brand: D-Link Pages: 354
Clever Little Box Wi-View 300V User Manual preview
Wi-View 300V
Brand: Clever Little Box Pages: 15
Tripp Lite B155-002-DP-V2 Owner'S Manual preview
B155-002-DP-V2
Brand: Tripp Lite Pages: 12
Magnum M9-EKCS Quick Start Manual preview
M9-EKCS
Brand: Magnum Pages: 3
Cabletron Systems Cyber SWITCH 1000 User Manual preview
Cyber SWITCH 1000
Brand: Cabletron Systems Pages: 106
Cabletron Systems MMAC-Plus 9T125-24 Supplementary Manual preview
MMAC-Plus 9T125-24
Brand: Cabletron Systems Pages: 36
Harman AMX PR01-0808 User Manual preview
AMX PR01-0808
Brand: Harman Pages: 50
Tabs TBGW100-915 Reference Manual preview
TBGW100-915
Brand: Tabs Pages: 4
Jerguson SAS-16 Installation, Operation & Maintenance Instructions preview
SAS-16
Brand: Jerguson Pages: 4
Guralp Systems NAM MkII Quick Start Manual preview
NAM MkII
Brand: Guralp Systems Pages: 22
PowerShield PSMBSR10K Quick Manual preview
PSMBSR10K
Brand: PowerShield Pages: 2
Pulsar SG108 Quick Start Manual preview
SG108
Brand: Pulsar Pages: 5
VigilLink VL-MX88-1 User Manual preview
VL-MX88-1
Brand: VigilLink Pages: 24
Atlona AT-COMP-44M User Manual preview
AT-COMP-44M
Brand: Atlona Pages: 13

Brands by name

Popular brands

Load more brands