xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
299
forwarded.
Interval
The maximum number of seconds between successive samples of the counters.
Click the
Apply
button to accept the changes made.
Click the
Delete All
button to remove all the entries listed.
Click the
Edit
button to re-configure the specific entry.
Click the
Delete
button to remove the specific entry.
Ping Test
Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination node then
responds to or “echoes” the packets sent from the Switch. This is very useful to verify connectivity between the
Switch and other nodes on the network.
To view this window, click
Monitoring > Ping Test
as shown below:
Figure 11–23 Ping Test window (SI Mode Only)
Figure 11–24 Ping Test window (EI Mode Only)
The user may click the Infinite times radio button, in the Repeat Pinging for field, which will tell the ping program to
keep sending ICMP Echo packets to the specified IP address until the program is stopped. The user may opt to
choose a specific number of times to ping the Target IP Address by clicking its radio button and entering a number
between
1
and
255
.
The fields that can be configured are described below:
Summary of Contents for DGS-3120-24PC-EI
Page 1: ......
