manualshive.com logo in svg

D-Link DGS-3120-24PC-EI, Product Manual

The D-Link DGS-3120-24PC-EI is a high-performance switch designed for reliable and efficient network connectivity. With advanced features and 24 power-over-Ethernet ports, this product delivers exceptional performance. Visit our website to easily access the free product manual and download it, ensuring you can make the most of this powerful switch.

Share
Download
background image

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide 

268 

 

 

Figure 10–4 CFM MIP Port Table Window 

 

Click the 

<<Back

 button to return to the previous page. 

 

After clicking the 

Add MEP

 button, the following page will appear: 

 

Figure 10–5 CFM MEP Settings (Add) Window 

 

The fields that can be configured are described below: 

Parameter 

Description 

MEP Name 

MEP name. It is unique among all MEPs configured on the device. 

MEP ID 

MEP MEPID. It should be configured in the MA’s MEP ID list. 

Port 

Port number. This port should be a member of the MA’s associated VLAN. 

MEP Direction 

This is the MEP direction. 

Inward

 - Inward facing (up) MEP. 

Outward

 - Outward facing (down) MEP. 

Click the 

Add

 button to add a new entry based on the information entered. 

Click the 

<<Back

 button to discard the changes made and return to the previous page. 

Click the 

View Detail

Click the 

Delete 

button to remove the specific entry. 

 link to view more information regarding the specific entry. 

 

 

NOTE: 

The MEP Name value should be less than 32 characters. 

 

After clicking the 

View Detail

 link, the following page will appear: 

Summary of Contents for DGS-3120-24PC-EI




















































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3120-24PC-EI

Panduit ATLONA Omega AT-OME-MS52W Manual preview
ATLONA Omega AT-OME-MS52W
Brand: Panduit Pages: 123
Panduit Atlona AT-OME-MS42 Manual preview
Atlona AT-OME-MS42
Brand: Panduit Pages: 86
Ubiquiti ES-24-250W Quick Start Manual preview
ES-24-250W
Brand: Ubiquiti Pages: 24
Ubiquiti USW-24 User Manual preview
USW-24
Brand: Ubiquiti Pages: 13
Ubisys ZIGBEE S2(-R) Quick Start Manual preview
ZIGBEE S2(-R)
Brand: Ubisys Pages: 2
D-Link DXS-3410 Series Hardware Installation Manual preview
DXS-3410 Series
Brand: D-Link Pages: 54
SMART-AVI RDU-8P Quick Start Manual preview
RDU-8P
Brand: SMART-AVI Pages: 2
Labgear 28574LAB User Manual preview
28574LAB
Brand: Labgear Pages: 4
ATEN ALTUSCN KH1508I User Manual preview
ALTUSCN KH1508I
Brand: ATEN Pages: 173
Grizzly H8239 Instructions preview
H8239
Brand: Grizzly Pages: 2
Ruby Tech GS-1148L Technical Specifications preview
GS-1148L
Brand: Ruby Tech Pages: 2
Oehlbach UltraHD Switch 3:1 User Manual preview
UltraHD Switch 3:1
Brand: Oehlbach Pages: 20
Extron electronics 4xi series User Manual preview
4xi series
Brand: Extron electronics Pages: 3
Waeco PerfectView GPS300 Installation And Operating Manual preview
PerfectView GPS300
Brand: Waeco Pages: 72
Hewlett Packard Enterprise FlexFabric 5940 Series Configuration Manual preview
FlexFabric 5940 Series
Brand: Hewlett Packard Enterprise Pages: 123
M-system SHSP Instruction Manual preview
SHSP
Brand: M-system Pages: 4
ICCN WX7020-1210G Web User Manual preview
WX7020-1210G
Brand: ICCN Pages: 48
Edimax ER-5397P User Manual preview
ER-5397P
Brand: Edimax Pages: 8

Brands by name

Popular brands

Load more brands