manualshive.com logo in svg

D-Link DGS-3120-24PC-EI, Product Manual

The D-Link DGS-3120-24PC-EI is a high-performance switch designed for reliable and efficient network connectivity. With advanced features and 24 power-over-Ethernet ports, this product delivers exceptional performance. Visit our website to easily access the free product manual and download it, ensuring you can make the most of this powerful switch.

Share
Download
background image

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide 

295 

 

 

 

NOTE:

 RSPAN VLAN mirroring will only work when RSPAN is enabled (when one RSPAN VLAN has 

been configured with a source port). The RSPAN redirect function will work when RSPAN is 
enabled and at least one RSPAN VLAN has been configured with redirect ports. 

 

 

To view this window, click 

Monitoring > Mirror > RSPAN Settings 

as shown below: 

 

 

Figure 11–17 RSPAN Settings window 

 

The fields that can be configured are described below: 

Parameter 

Description 

RSPAN State 

Click the radio buttons to enable or disable the RSPAN feature. 

VLAN Name 

Create the RSPAN VLAN by VLAN name. 

VID 

Create the RSPAN VLAN by VLAN ID. 

Click the 

Apply

 button to accept the changes made. 

Click the 

Add

 button to add a new entry based on the information entered. 

Click the 

Modify 

button to re-configure the specific entry. 

Click the 

Delete 

button to remove the specific entry. 

 

After clicking the 

Modify

 button, the following page will appear: 

 

Figure 11–18 RSPAN Settings – Modify window 

 

The fields that can be configured are described below: 

Parameter 

Description 

VID 

Displays the RSPAN VLAN by VLAN ID. 

VLAN Name 

Displays the RSPAN VLAN by VLAN name. 

Source Ports 

If the ports are not specified by option, the source of RSPAN will come from the 
source specified by the mirror command or the flow-based source specified by an 
ACL. If no parameter is specified for source, it deletes the configured source 
parameters. 

Select 

RX, TX 

or 

Both

 to specify in which direction the packets will be monitored. 

Summary of Contents for DGS-3120-24PC-EI




















































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3120-24PC-EI

Ubisys S1 Reference Manual preview
S1
Brand: Ubisys Pages: 40
ASTEK A51606-SW Quick Start Manual preview
A51606-SW
Brand: ASTEK Pages: 3
Dahua PFS3106-4P-60 User Manual preview
PFS3106-4P-60
Brand: Dahua Pages: 15
Barox PC-IA100 Series User Manual preview
PC-IA100 Series
Brand: Barox Pages: 7
ALFAtron ALF-MUH88TP-N Manual preview
ALF-MUH88TP-N
Brand: ALFAtron Pages: 68
H3C S6520X-EI Series Manual preview
S6520X-EI Series
Brand: H3C Pages: 34
Kramer Sierra Pro XL 1608V5S Specifications preview
Sierra Pro XL 1608V5S
Brand: Kramer Pages: 2
H3C S5560S-EI Series Configuration Manual preview
S5560S-EI Series
Brand: H3C Pages: 47
Planet WGSW-5240 Specifications preview
WGSW-5240
Brand: Planet Pages: 2
Sun Oracle Sun Datacenter InfiniBand Switch 36 Hardware Security Manual preview
Sun Datacenter InfiniBand Switch 36
Brand: Sun Oracle Pages: 12
Intermatic T2006 Supplementary Manual preview
T2006
Brand: Intermatic Pages: 1
SMC Networks D-P5DW Installation And Maintenance Manual preview
D-P5DW
Brand: SMC Networks Pages: 1
Virtualfly SOLO Airliner RS User Manual preview
SOLO Airliner RS
Brand: Virtualfly Pages: 32
Nxg VCH8 Owner'S Manual preview
VCH8
Brand: Nxg Pages: 2
Black Box ServSwitch TDX User Manual preview
ServSwitch TDX
Brand: Black Box Pages: 21
Ruby Tech ES-1126C/D Specifications preview
ES-1126C/D
Brand: Ruby Tech Pages: 2
Smartwares SH8-90604 Manual preview
SH8-90604
Brand: Smartwares Pages: 44
Cooper Crouse-Hinds GHG 264 Operating Instructions Manual preview
GHG 264
Brand: Cooper Crouse-Hinds Pages: 24

Brands by name

Popular brands

Load more brands