xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
96
Figure 4–48 IGMP Snooping Static Group Settings window
Click the
Select All
button to select all the ports for configuration.
Click the
Clear All
button to unselect all the ports for configuration.
Click the
Apply
button to accept the changes made.
Click the
<<Back
button to discard the changes made and return to the previous page.
IGMP Router Port
Users can display which of the Switch’s ports are currently configured as router ports. A router port configured by a
user (using the console or Web-based management interfaces) is displayed as a static router port, designated by S.
A router port that is dynamically configured by the Switch is designated by D, while a Forbidden port is designated
by F.
To view the following window, click
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping
Router Port
, as show below:
Figure 4–49 IGMP Router Port window
Enter a VID (VLAN ID) in the field at the top of the window.
Click the
Find
button to locate a specific entry based on the information entered.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
NOTE:
The abbreviations used on this page are
Static Router Port (S)
,
Dynamic Router Port (D)
and
Forbidden Router Port (F)
.
IGMP Snooping Group
Users can view the Switch’s IGMP Snooping Group Table. IGMP Snooping allows the Switch to read the Multicast
Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch.
To view the following window, click
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping
Group
, as show below:
Summary of Contents for DGS-3120-24PC-EI
Page 1: ......
