xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
133
Figure 5–2 IPv4 Static/Default Route Settings window
The fields that can be configured are described below:
Parameter
Description
IP Address
This field allows the entry of an IPv4 address to be assigned to the Static or Default
route.
Netmask
This field allows the entry of a subnet mask to be applied to the corresponding subnet
mask of the IP address.
Gateway
This field allows the entry of a Gateway IP Address to be applied to the corresponding
gateway of the IP address.
Metric
Represents the metric value of the IP interface entered into the table. This field may read
a number between 1 and 65535.
Backup State
Each IP address can only have one primary route, while other routes should be assigned
to the backup state. When the primary route failed, switch will try the backup routes
according to the order learnt by the routing table until route success. The field represents
the Backup state that the Static and Default Route is configured for.
Click the
Apply
button to accept the changes made.
IPv4 Route Table
The IP routing table stores all the external routes information of the switch. On this page the user can view all the
external route information on the switch.
To view the following window, click
L3 Features > IPv4 Route Table
, as show below:
Figure 5–3 IPv4 Route Table window (SI Mode Only)
Figure 5–4 IPv4 Route Table window (EI Mode Only)
Summary of Contents for DGS-3120-24PC-EI
Page 1: ......
