manualshive.com logo in svg

D-Link DGS-3120-24PC-EI, Product Manual

The D-Link DGS-3120-24PC-EI is a high-performance switch designed for reliable and efficient network connectivity. With advanced features and 24 power-over-Ethernet ports, this product delivers exceptional performance. Visit our website to easily access the free product manual and download it, ensuring you can make the most of this powerful switch.

Share
Download
background image

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide 

51 

 

 

Figure 3–39 SNMP Engine ID Settings window 

 

The fields that can be configured are described below: 

Parameter 

Description 

Engine ID 

To change the Engine ID, type the new Engine ID value in the space provided. The SNMP 
engine ID displays the identification of the SNMP engine on the Switch. The default value is 
suggested in RFC2271. The very first bit is 1, and the first four octets are set to the binary 
equivalent of the agent’s SNMP management private enterprise number as assigned by 
IANA (D-Link is 171). The fifth octet is 03 to indicate the rest is the MAC address of this 
device. The sixth to eleventh octets is the MAC address. 

Click the 

Apply

 button to accept the changes made. 

 

 

NOTE:

 The Engine ID length is 10-64 and accepted characters can range from 0 to F. 

 

SNMP User Table Settings 

This window

 

displays all of the SNMP User’s currently configured on the Switch. 

To view the following window, click 

Management > SNMP Settings > SNMP User Table Settings

, as show below: 

 

 

Figure 3–40 SNMP User Table Settings window 

 

The fields that can be configured are described below: 

Parameter 

Description 

User Name 

An alphanumeric string of up to 32 characters. This is used to identify the SNMP 
users. 

Group Name 

This name is used to specify the SNMP group created can request SNMP messages. 

SNMP Version 

V3 

– Indicates that SNMP version 3 is in use. 

SNMP V3 Encryption 

Use the drop-down menu to enable encryption for SNMP V3. This is only operable in 
SNMP V3 mode. The choices are 

None

, 

Password

, or 

Key

.

 

Auth-Protocol 

MD5 

– Specify that the HMAC-MD5-96 authentication level will be used. This field is 

Summary of Contents for DGS-3120-24PC-EI




















































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3120-24PC-EI

D-Link xStack DGS-3420 Series How To Set Up preview
xStack DGS-3420 Series
Brand: D-Link Pages: 2
D-Link DXS-3600-32S Quick Installation Manual preview
DXS-3600-32S
Brand: D-Link Pages: 29
D-Link DWS-1008 User Manual preview
DWS-1008
Brand: D-Link Pages: 454
D-Link DWS-1008 Product Manual preview
DWS-1008
Brand: D-Link Pages: 502
D-Link DGS-3312SR Product Manual preview
DGS-3312SR
Brand: D-Link Pages: 244
D-Link GO-SW-5G User Manual preview
GO-SW-5G
Brand: D-Link Pages: 20
D-Link DES-1008E Quick Install Manual preview
DES-1008E
Brand: D-Link Pages: 2
D-Link KVM-440 User Manual preview
KVM-440
Brand: D-Link Pages: 37
D-Link DES-1018DG Quick Installation Manual preview
DES-1018DG
Brand: D-Link Pages: 28
6TL YAV904X8 Manual preview
YAV904X8
Brand: 6TL Pages: 25
socomec 95333400 Instruction Manual preview
95333400
Brand: socomec Pages: 43
Waeco PerfectView GPS300 Installation And Operating Manual preview
PerfectView GPS300
Brand: Waeco Pages: 72
Videplus JAR-SW16-P300 User Manual preview
JAR-SW16-P300
Brand: Videplus Pages: 13
AV-Box WUH5-H2 User Manual preview
WUH5-H2
Brand: AV-Box Pages: 11
Velleman VMS8 Quick Start Manual preview
VMS8
Brand: Velleman Pages: 4
Black Box Personal MiniHub Manual preview
Personal MiniHub
Brand: Black Box Pages: 22
PIKA mWARP Manual preview
mWARP
Brand: PIKA Pages: 7
UNIARCH SW-2106-P User Manual preview
SW-2106-P
Brand: UNIARCH Pages: 6

Brands by name

Popular brands

Load more brands