D-Link DGS-1100-06/ME Cli Reference Manual Download Page 175

Page: 175 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide

163

Description

The

show mld_snooping forwarding

command displays the

current MLD snooping forwarding table entries currently configured
on the Switch.

Parameters

vlan_name <string 20>

–

Displays that the mld snooping applies

only to this previously created VLAN.

vlanid <vidlist>

–

Displays that the mld snooping applies only to this

previously created VLAN id.

all

–

Displays that all MLD snooping which configured for all VLANs

on the Switch.

Restrictions

None.

Example usage:

To display the MLD snooping forwarding:

DGS-1100-06/ME:5#show mld_snooping forwarding all
Command: show mld_snooping forwarding all

Total Entries : 0
DGS-1100-06/ME:5#

show mld_snooping group

Purpose

To display mld snooping group settings on the Switch.

Syntax

show mld_snooping group [vlan_name <string 20> | vlanid
<vidlist> | all | ports <portlist>]

Description

The

show mld_snooping group

command displays the multicast

groups that were learned by MLD snooping.

Parameters

vlan_name <string 20>

–

The name of the VLAN for which to view

the MLD snooping group configurations.

vlanid <vidlist>

–

The id of the VLAN for which to view the MLD

snooping group configurations.

all

–

Displays that all MLD snooping which configured for all VLANs

on the Switch.

ports <portlist>

–

The ports of the VLAN for which to view the MLD

snooping group configurations.

Restrictions

None.

Example usage:

To show the MLD snooping groups:

DGS-1100-06/ME:5#show mld_snooping group all
Command: show mld_snooping group all

Total Entries : 0

DGS-1100-06/ME:5#

Summary of Contents for DGS-1100-06/ME




















































































































































































































































































Search results

Summary of Contents for DGS-1100-06/ME

Reviews:

Related manuals for DGS-1100-06/ME

Brands by name

Popular brands

D-Link DGS-1100-06/ME, Cli Reference Manual

Search results

Summary of Contents for DGS-1100-06/ME

Reviews:

Related manuals for DGS-1100-06/ME

Brands by name

Popular brands