D-Link DGS-1100-06/ME, Cli Reference Manual

Page: 94 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
82
config dhcpv6_relay
Purpose Used to add or delete a destination IP address to or from the
switch’s DHCPv6 relay table.
Syntax
config dhcpv6_relay [add | delete] ipif System <ipv6_addr>
Description The
config dhcpv6_relay
command can add or delete an IPv6
destination address to forward (relay) DHCPv6 packets.
Parameters add
− Add an IPv6 destination to the DHCPv6 relay table.
delete
− Remove an IPv6 destination to the DHCPv6 relay table.
ipif system
− The name of the IP interface in which DHCPv6 relay is
to be enabled.
<ipv6_addr>
− The DHCPv6 server IP address.
Restrictions Only Administrator or operate-level users can issue this command.
Example usage:
To add the DHCPv6 relay on the Switch:
DGS-1100-06/ME:5#config dhcpv6_relay add ipif System 3000::1
Command: config dhcpv6_relay add ipif System 3000::1
Success!
DGS-1100-06/ME:5#
config dhcpv6_relay hop_count
Purpose Used to configure the DHCPv6 relay hop count of the switch.
Syntax
config dhcpv6_relay hop_count <value 1-32>
Description The
config dhcpv6_relay hops_count
command is used to
configure the DHCPv6 relay hop count of the switch.
Parameters <value 1-32>
− The hop count is the number of relay agents that
have to be relayed in this message. The range is 1 to 32. The
default value is 4.
Restrictions Only Administrator or operate-level users can issue this command.
Example usage:
To configure the DHCPv6 relay hop count on the Switch:
DGS-1100-06/ME:5#config dhcpv6_relay hop_count 3
Command: config dhcpv6_relay hop_count 3
Success!
DGS-1100-06/ME:5#