D-Link DGS-1100-06/ME, Cli Reference Manual

Page: 196 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
184
VLAN is enabled, the member port receives limited network access.
For example, a network administrator can use the 802.1x Guest
VLAN to deny internal network access via port
–based
authentication, but grant Internet access to unauthorized users.
Parameters <portlist>
– A port or range of ports to be configured to the Guest
VLAN.
All
– Indicates all ports to be configured to the guest vlan.
state [enable | disable]
– Specifies the guest vlan port is enabled or
disabled of the switch.
Restrictions Only Administrator or operator
–level users can issue this command.
Example usage:
To configure ports to the Guest VLAN:
DGS-1100-06/ME:5#config 802.1x guest_vlan ports 1-3 state enable
Command: config 802.1x guest_vlan ports 1-3 state enable
Success.
DGS-1100-06/ME:5#
show 802.1x guest_vlan
Purpose Displays configuration information for the Guest VLAN.
Syntax
show 802.1x guest_vlan
Description The
show 802.1x guest_vlan
command displays the Guest VLAN
name, state, and member ports.
Parameters None.
Restrictions None.
Example usage:
To display the Guest VLAN configuration information:
DGS-1100-06/ME:5#show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Settings
------------------------------------------------------------------------
Guest VLAN : default
Enabled Guest VLAN Ports : 1,2,3,4,5,6
DGS-1100-06/ME:5#
create 802.1x user
Purpose Enable network access to a 802.1x user.
Syntax
create 802.1x user <username 15>
Description The
create 802.1x user
command enables network access to a
802.1x user.
Parameters <vlan_name 15>
− The name of the 802.1x user to be created.