D-Link DGS-1100-06/ME Cli Reference Manual Download Page 121

Page: 121 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide

109

Syntax

config qos mode [802.1p | dscp | portbased]

Description

The

config qos mode

command is used to configure the QoS mode

on the Switch.

Parameters

[802.1p | dscp | portbased]

–

Specifies the QoS mode to be 802.1p,

dscp or portbased.

Restrictions

Only administrator or operator-level users can issue this command.

Example usage:

To configure the QoS mode to be portbased on the Switch:

DGS-1100-06/ME:5# config qos mode portbased
Command: config qos mode portbased

Success

DGS-1100-06/ME:5#

show qos mode

Purpose

To display the QoS mode.

Syntax

show qos mode

Description

The

show qos mode

command is used to display the QoS mode on

the Switch.

Parameters

None.

Restrictions

None.

Example usage:

To display the QoS mode on the Switch:

DGS-1100-06/ME:5# show qos mode
Command: show qos mode

Qos mode : portbase

DGS-1100-06/ME:5#

config cos ipv6_tc_mapping

Purpose

To configure the CoS IPv6 TC mapping method.

Syntax

config cos ipv6_tc_mapping trafficclass <class_id 0-255>
priority [high | highest | low | medium]

Description

The

config cos ipv6_tc_mapping

command is used to configure

the CoS IPv6 mapping method on the Switch.

Parameters

<class_id 0-255>

- Specifies the IPv6 traffic class to be mapped.

The range is 0 to 255.

priority [high | highest | low | medium]

- Specifies the priority of the

ipv6 mapping priority queue.

Summary of Contents for DGS-1100-06/ME




















































































































































































































































































Search results

Summary of Contents for DGS-1100-06/ME

Reviews:

Related manuals for DGS-1100-06/ME

Brands by name

Popular brands

D-Link DGS-1100-06/ME, Cli Reference Manual

Search results

Summary of Contents for DGS-1100-06/ME

Reviews:

Related manuals for DGS-1100-06/ME

Brands by name

Popular brands