D-Link DGS-1100-06/ME Cli Reference Manual Download Page 172

Page: 172 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide

160

DGS-1100-06/ME:5#

create mld_snooping multicast_vlan

Purpose

To create MLD snooping multicast VLAN on the Switch.

Syntax

create

mld snooping multicast_vlan <vlan_name 32> <vlanid 2-

4094>

Description

The

create

mld snooping multicast_vlan

command creates MLD

snooping multicast VLAN on the Switch.

Parameters

<vlan_name 32>

–

Specifies the VLAN name of MLD snooping to be

created.

<vlanid 2-4094>

–

Specifies the VLAN id of MLD snooping to be

created.

Restrictions

Only administrator or operator

–level users can issue this command.

Example usage:

To create the MLD snooping multicast VLAN:

DGS-1100-06/ME:5# create mld_snooping multicast_vlan rd2 10
Command: create mld_snooping multicast_vlan rd2 10

Success.

DGS-1100-06/ME:5#

delete mld_snooping multicast_vlan

Purpose

To remove MLD snooping multicast VLAN on the Switch.

Syntax

delete

mld snooping multicast_vlan [<vlan_name 32> | all]

Description

The

delete

mld snooping multicast_vlan

command removes MLD

snooping multicast VLAN on the Switch.

Parameters

<vlan_name 32>

–

Specifies the VLAN name of MLD snooping to be

created.

all

–

Specifies all MLD snooping multicast VLAN to be removed.

Restrictions

Only administrator or operator

–level users can issue this command.

Example usage:

To remove the MLD snooping multicast VLAN:

DGS-1100-06/ME:5# delete mld_snooping multicast_vlan rd2
Command: delete mld_snooping multicast_vlan rd2

Success.

DGS-1100-06/ME:5#

config mld_snooping multicast_vlan

Purpose

To configure mld snooping multicast VLAN.

Syntax

config mld_snooping multicast_vlan <vlan_name 32> [[add

Summary of Contents for DGS-1100-06/ME




















































































































































































































































































Search results

Summary of Contents for DGS-1100-06/ME

Reviews:

Related manuals for DGS-1100-06/ME

Brands by name

Popular brands

D-Link DGS-1100-06/ME, Cli Reference Manual

Search results

Summary of Contents for DGS-1100-06/ME

Reviews:

Related manuals for DGS-1100-06/ME

Brands by name

Popular brands