D-Link DGS-1100-06/ME, Cli Reference Manual

Page: 233 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
221
DGS-1100-06/ME:5#disable authen_policy
Command: disable authen_policy
Success.
DGS-1100-06/ME:5#
show authen_policy
Purpose Used to display the system access authentication policy status on
the Switch.
Syntax
show authen_policy
Description The
show authen_policy
command display the system access
authentication policy status on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the system access authentication policy:
DGS-1100-06/ME:5#show authen_policy
Command: show authen_policy
Authentication Policy : Disabled
DGS-1100-06/ME:5#
config authen application
Purpose To configure various applications on the Switch for authentication
using a previously configured method list.
Syntax
config authen application [console | http | all] [login | enable]
[default | method_list_name <string 15>]
Description The
config authen application
command configures Switch
applications (console, Telnet) for login at the user level and at the
administration level (
authen_enable ), utilizing a previously
configured method list.
Parameters application
– Specifies the application to configure. One of the
following four options may be selected:

console
– Configures the command line interface login
method.

http
– Configures the http login method.

all
– Configures all applications as (console, Telnet, SSH)
login methods.
login
– Configures an application for normal login on the user level,
using a previously configured method list.
enable
– Configures an application for upgrading a normal user level
to administrator privileges, using a previously configured method list.
default
– Configures an application for user authentication using the