D-Link DGS-1100-06/ME Cli Reference Manual Download Page 108

Page: 108 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide

specified device through this port.

Restrictions

Only Administrator or operator-level users can issue this command.

Example usage:

To create a unicast MAC FDB entry:

DGS-1100-06/ME:5#create fdb default 00-00-00-00-01-02 port 2
Command: create fdb default 00-00-00-00-01-02 port 2

Success
DGS-1100-06/ME:5#

create multicast_fdb

Purpose

To create a static entry in the multicast MAC address forwarding
table (database).

Syntax

create multicast_fdb <int 1-4094><macaddr>

Description

The

create multicast_fdb

command creates a static entry in the

multicast MAC address forwarding table (database).

Parameters

<integer 1-4094>

− The item of the VLAN on which the MAC

address resides. The range is between 1 and 4094.

<macaddr>

− The MAC address to be added to the forwarding table.

Restrictions

Only Administrator or operator-level users can issue this command.

Example usage:

To create multicast MAC forwarding:

DGS-1100-06/ME:5#create multicast_fdb 1 00-00-00-01-02-03
Command: create multicast_fdb 1 00-00-00-01-02-03

Success.
DGS-1100-06/ME:5#

config multicast_fdb

Purpose

configure the Switch’s multicast MAC address forwarding

database.

Syntax

config multicast_fdb <integer 1-4094> <macaddr> [add | delete]
<portlist>

Description

The

config multicast_fdb

command configures the multicast MAC

address forwarding table.

Parameters

<integer 1-4094>

− The item of the VLAN on which the MAC

address resides. The range is between 1 and 4094.

<macaddr>

− The MAC address to be configured to the forwarding

table.

add

− Specifies that the MAC address is to be added to the

forwarding table. Delete will remove the MAC address from the
forwarding table.

delete

− Specifies that the MAC address is to be removed from the

forwarding table.

<portlist>

− A port or range of ports to be configured.

Summary of Contents for DGS-1100-06/ME




















































































































































































































































































Search results

Summary of Contents for DGS-1100-06/ME

Reviews:

Related manuals for DGS-1100-06/ME

Brands by name

Popular brands

D-Link DGS-1100-06/ME, Cli Reference Manual

Search results

Summary of Contents for DGS-1100-06/ME

Reviews:

Related manuals for DGS-1100-06/ME

Brands by name

Popular brands