D-Link DGS-1100-06/ME, Cli Reference Manual

Page: 167 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
155
24
MLD SNOOPING COMMANDS
The MLD Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameter
enable mld_snooping {forward_mcrouter only}
disable mld_snooping {forward_mcrouter only}
config mld_snooping
[vlan_name <string 20> | vlanid <vidlist> | all] {fast_done [enable | disable] |
host_timeout <sec 130-1530255> | leave_timer <sec 1-25> | router_timeout <sec
60-600> | state [enable | disable]}
config mld_snooping
mrouter_ports
[vlan_name <string 20> | vlanid <vidlist> | all] [add | delete] <portlist>
config mld_snooping
querier
[vlan_name <string 20> | vlanid <vidlist> | all] [last_listener_query_interval <sec
1-25> | max_response_time <sec 10-25> | query_interval <sec 60-600> |
robustness_variable | state [enable | disable] | version <value 1-2>]
enable mld snooping
multicast_vlan
disable mld snooping
multicast_vlan
create mld snooping
multicast_vlan
<vlan_name 32> <vlanid 2-4094>
delete mld snooping
multicast_vlan
[<vlan_name 32> | all]
config mld_snooping
multicast_vlan <vlan_name 32> [[add |delete] member_port <portlist>] replace_source_ipv6
<ipv6addr>] {state [enable | disable]}
config mld_snooping
multicast_vlan_group
<vlan_name 32> [add |delete] ipv6_range <ipv6addr> <ipv6addr>
show mld snooping [vlan_name <string 20> | vlanid <vidlist> | all]
show mld_snooping
forwarding
[vlan_name <string 20> | vlanid <vidlist> | all]
show mld_snooping
group
[vlan_name <string 20> | vlanid <vidlist> | all | ports <portlist>]
show mld_snooping
mrouter_ports
[vlan_name <string 20> | vlanid <vidlist> | all ] [dynamic | static]
show mld_snooping
statistic counter
[vlan_name <string 20> | vlanid <vidlist> | all | ports <portlist>]
clear mld_snooping
statistics counter
show mld_snooping
host [vlan_name <string 20> | vlanid <vidlist> | all | ports <portlist> | group
<ipv6_addr>]