DES-3000 Series Layer 2 Switch CLI Reference Manual
show loopdetect ports
Purpose
Used to display the Loopback Detection port settings on the switch.
Syntax
show loopdetect ports {<portlist>}
Description
This command will display the loopdetect port settings currently set
on the switch.
Parameters
<portlist>
- Enter a port or range of ports to be displayed. Not
enetering this parameter will display all ports on the switch.
Restrictions None.
Example usage:
To display the loopback detection parameters:
DES-3026:4#show loopdetect ports 1-5
Command: show loopdetect ports 1-5
Port Loopdetect State Loop status
-------- ------------------------- -------------------
1 Enabled Normal
2 Enabled Normal
3 Enabled Normal
4 Enabled Normal
5 Disabled Normal
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
75
