DES-3000 Series Layer 2 Switch CLI Reference Manual
Example usage:
To display the 802.1x authentication states (stacking disabled) for Port-based 802.1x:
------ -------------- ------------- ------------
3 ForceAuth Success Authorized
DES-3026:4#show 802.1x auth_state ports 1-5
Command: show 802.1x auth_state ports 1-5
Port Auth PAE State Backend State Port Status
1 ForceAuth Success Authorized
2 ForceAuth Success Authorized
4 ForceAuth Success Authorized
5 ForceAuth Success Authorized
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
Example usage:
To display the 802.1x authentication states (stacking disabled) for MAC-based 802.1x:
DES-3026:4#show 802.1x auth_state
Command: show 802.1x auth_state
Port number : 1
Index MAC Address Auth PAE State Backend State Port Status
------ ------------------- ----------------------- --------------------- -----------------
1 00-08-02-4E-DA-FA Authenticated Idle Authorized
2
3
4
5
6
7
8
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
show 802.1x
auth_configuration
Purpose
Used to display the current configuration of the 802.1x server on the Switch.
Syntax
show 802.1x auth_configuration {ports <portlist>}
Description
The show 802.1x command is used to display the current configuration of the 802.1x Port-
based Network Access Control server application on the Switch.
The following details what is displayed:
802.1x Enabled/Disabled
−
Shows the current status of 802.1x functions on the Switch.
Authentication Protocol: Radius_Eap
−
Shows the authentication protocol suite in use
between the Switch and a RADIUS server.
Port number
−
Shows the physical port number on the Switch.
Capability: Authenticator/None
−
Shows the capability of 802.1x functions on the port number
displayed above. There are four 802.1x capabilities that can be set on the Switch:
Authenticator, Supplicant, Authenticator and Supplicant, and None.
Port Status: Authorized/Unauthorized
−
Shows the result of the authentication process.
Authorized means that the user was authenticated, and can access the network.
Unauthorized means that the user was not authenticated, and can not access the network.
PAE State: Initialize/Disconnected/Connecting/ Authenticating/Authenticated/Held
145
