D-Link DES-3010F, Command Line Interface Manual

Page: 19 / 187

DES-3000 Series Layer 2 Switch CLI Reference Manual
disable telnet
Purpose Used to disable the Telnet protocol on the Switch.
Syntax disable telnet
Description This command is used to disable the Telnet protocol on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the Telnet protocol on the Switch:
DES-3026:4#disable telnet
Command: disable telnet
Success.
DES-3026:4#
enable web
Purpose Used to enable the HTTP-based management software on the
Switch.
Syntax enable web {<tcp_port_number 1-65535>}
Description This command is used to enable the Web-based management
software on the Switch.
Parameters
<tcp_port_number 1-65535>
−
The TCP port number. TCP ports
are numbered between 1 and 65535. The “well-known” port for the
Web-based management software is 80.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable HTTP and configure port number:
DES-3026:4#enable web 80
Command: enable web 80
Success.
DES-3026:4#
disable web
Purpose Used to disable the HTTP-based management software on the
Switch.
Syntax disable web
Description This command disables the Web-based management software on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable HTTP:
17