DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
213
22
A
CCESS
C
ONTROL
L
IST
(ACL)
C
OMMANDS
The Switch implements Access Control Lists that enable the Switch to deny network access to specific devices or device groups
based on IP settings and MAC address.
The Access Control commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
Parameters
create access_profile
[ ethernet {vlan {<hex 0x0-0x0fff>} | source_mac <macmask> | destination_mac
<macmask> | 802.1p | ethernet_type} (1) | ip {vlan {<hex 0x0-0x0fff>} | source_ip_mask
<netmask> | destination_ip_mask <netmask> | dscp | [ icmp {type | code} | igmp {type} |
tcp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff> | flag_mask [ all | {urg
| ack | psh | rst | syn | fin} (1) ] } | udp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex
0x0-0xffff> } | protocol_id_mask<0x0-0xff> ] } (1) | ipv6 { class | flowlabel |
source_ipv6_mask< ipv6mask ::-::FFF:FFFF:FFFF> [ tcp { src_port_mask <hex 0x0-0xffff> |
dst_port_mask <hex 0x0-0xffff>} | udp { src_port_mask <hex 0x0-0xffff> | dst_port_mask
<hex 0x0-0xffff> } ] } ] profile_id <value 1-256>
delete access_profile [profile_id <value 1-256> | all]
config access_profile
[profile_id <value 1-256>] [add access_id [auto_assign | <value 1-65535>] [ethernet {[vlan
<vlan_name 32> | vlan_id <vid> ] {mask <hex 0x0-0x0fff>} | source_mac <macaddr> {mask
<macmask>} | destination_mac <macaddr> {mask <macmask>} | 802.1p <value 0-7> |
ethernet_type <hex 0x0-0xffff>} (1) | ip {[vlan <vlan_name 32> | vlan_id <vid>] {mask <hex
0x0-0x0fff>} | source_ip <ipaddr> {mask <netmask> } | destination_ip <ipaddr> {mask
<netmask>} | dscp <value 0-63> | [ icmp {type <value 0-255> code <value 0-255>} | igmp
{type <value 0-255>} | tcp {src_port <value 0-65535> {mask <hex 0x0-0xffff>} | dst_port
<value 0-65535> {mask <hex 0x0-0xffff>} | flag [all | { urg | ack | psh | rst | syn | fin } (1) ] } |
udp {src_port <value 0-65535> | dst_port <value 0-65535> } | protocol_id <value 0-255> }
(1) ] } | ipv6 {class <value 0-255> | flowlabel <hex 0x0-0xfffff> | source_ipv6 <ipv6addr>
{mask <ipv6mask>} | [ tcp {src_port < value 0-65535> {mask <hex 0x0-0xffff> } | dst_port <
value 0-65535>{ mask <hex 0x0-0xffff>}} udp {src_port <value 0-65535> {mask <hex 0x0-
0xffff>} | dst_port <value 0-65535> {mask <hex 0x0-0xffff>}} (1) ]}] [port [<portlist>|all]]
[permit {priority<value 0-7> {replace_priority} | replace_dscp_with <value0-63>| counter
[enable | disable] } | deny | mirror ] | delete access_id <value 1-65535>]
show access_profile
{profile_id <value 1-256>}
enable
cpu_interface_filtering
disable
cpu_interface_filtering
create cpu
access_profile
profile_id
<value 1-3> [ethernet {vlan | source_mac <macmask> | destination_mac <macmask> |
802.1p | ethernet_type} (1) | ip { vlan | source_ip_mask <netmask> | destination_ip_mask
<netmask> | dscp | [ icmp {type | code } | igmp {type } | tcp {src_port_mask <hex 0x0-0xffff>
| dst_port_mask <hex 0x0-0xffff> | flag_mask [ all | {urg | ack | psh | rst | syn | fin} (1) ] } |
udp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff>} protocol_id_mask
<hex 0x0-0xff> {user_define_mask <hex 0x0-0xffffffff>} ]} (1) | ipv6 {[{ class | flowlabel |
source_ipv6_mask <ipv6mask> | destination_ipv6_mask <ipv6mask>]} (1) ]
delete cpu
access_profile
profile_id <value 1-3>
config cpu
access_profile
profile_id
profile_id <value 1-3> [add access_id <value 1-5>[ethernet {vlan <vlan_name 32> |
source_mac <macaddr> | destination_mac <macaddr > | 802.1p <value 0-7> |
ethernet_type <hex 0x0-0xffff>} (1) | ip{vlan <vlan_name 32> | source_ip <ipaddr> |
destination_ip <ipaddr> | dscp <value 0-63> | [icmp {type <value 0-255> | code <value 0-
255>} | igmp {type <value 0-255>} | tcp {src_port <value 0-65535> | dst_port <value 0-
65535> flag [all { urg | ack | psh | rst | syn | fin} (1) ]} | udp {src_port <value 0-65535> |
