DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
201
config radius add
Purpose
Used to configure the settings the Switch will use to communicate with a RADIUS
server.
Syntax
config radius add <server_index 1-3> [<server_ip>] key <passwd 32> [default |
{auth_port <udp_port_number 1-65535> | acct_port <udp_port_number 1-65535> }
(1) ]
Description
This command is used to configure the settings the Switch will use to communicate
with a RADIUS server.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of RADIUS server settings.
Up to three groups of RADIUS server settings can be entered on the Switch.
<server_ip>
−
The IP address of the RADIUS server.
key
−
Specifies that a password and encryption key will be used between the Switch
and the RADIUS server.
<passwd 32>
−
The shared-secret key used by the RADIUS server and the Switch. Up
to 32 characters can be used.
default
−
Uses the default UDP port number in both the “auth_port” and “acct_port”
settings.
auth_port <udp_port_number 1-65535>
−
The UDP port number for authentication
requests. The default is 1812.
acct_port <udp_port_number 1-65535>
−
The UDP port number for accounting
requests. The default is 1813.
Restrictions
Only Administrator level, Operator level or Power User level users can issue this
command.
Example usage:
To configure the RADIUS server communication settings:
DES-1228/ME:5#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DES-1228/ME:5#
config radius delete
Purpose
Used to delete a previously entered RADIUS server configuration.
Syntax
config radius delete <server_index 1-3>
Description
This command is used to delete a previously entered RADIUS server
configuration.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of
RADIUS server settings. Up to three groups of RADIUS server
settings can be entered on the Switch.
Restrictions
Only Administrator level, Operator level or Power User level users
can issue this command.
Example usage:
To delete previously configured RADIUS server communication settings:
