manualshive.com logo in svg

D-Link DES-1228/ME, Reference Manual

The D-Link DES-1228/ME is a high-performance network switch designed for small to medium-sized businesses. With advanced features and reliable performance, this product offers exceptional value for optimizing your network. Access the Reference Manual for comprehensive information and configurations, available for free download at manualshive.com.

Share
Download
background image

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide 

 

404 

addresses 

IP-Mac-port 
Binding 

Unauthentiucated IP address 
discarded by IP mac port 
binding 

Unathenticated IP-MAC address and discarded by ip mac port 
binding (IP: <ipaddr>, MAC <macaddr>, Port <portNum>) 

Warning 

IP and 
Password 
Changed 

IP Address change activity 

Management IP address was changed into <ipAddr> by 
(Username: <username>, IP:<ipaddr>) 

Informational 

  

IP Address change activity by 
console 

Management IP address was changed into <ipAddr> by console 
(Username: <username>) 

Informational 

 

Password change activity 

User <username> Password was changed by (Username: 
<username>, IP:<ipaddr>) 

Informational 

  

Password change activity by 
console 

User <username> Password was changed by console 
(Username: <username>) 

Informational 

Safeguard 
Engine 

Safeguard Engine is in normal 
mode 

Safeguard Engine enters NORMAL mode 

Informational 

  

Safeguard Engine is in 
exhausted mode 

Safeguard Engine enters EXHAUSTED mode 

Warning 

Packet Storm 

Broadcast strom occurrence 

Port <portNum> Broadcast storm is occurring 

Warning 

  

Broadcast storm cleared 

Port <portNum> Broadcast storm has cleared 

Informational 

  

Multicast storm occurrence 

Port <portNum> Multicast storm is occurring 

Warning 

  

Multicast storm cleared 

Port <portNum> Multicast storm has cleared 

Informational 

  

Port shutdown due to a packet 
storm 

Port <portNum> is currently shutdown due to a packet storm 

Warning 

Gratuitous ARP 

Conflict IP was detected with 
this device 

Conflict IP was detected with this device (IP: <ipaddr>, MAC: 
<macaddr>, Port <portNum>), Interface: <interface>) 

Informational 

802.1X 

Radius server assigned VID: 
to port 

Radius server <server_ip> assigned VID: <VLAN_ID> to Port 
<portNum> (Account: <user_account>) 

Informational 

  

Radius server assigned 
ingress bandwith: Kbits to port 

Radius server <server_ip> assigned ingress bandwith: 
<bandwidth_value>Kbits to Port<portNum> (Account: 
<user_account>) 

Informational 

  

Radius server assigned 
ingress bandwith: no limit to 
port 

Radius server <server_ip> assigned ingress bandwith: no limit to 
Port <portNum> (Account: <user_account>) 

Informational 

  

Radius server assigned 
egress bandwidth: Kbits to 
port 

Radius server <server_ip> assigned egress bandwidth: 
<bandwidth_value> Kbits to Port <portNum> (Account: 
<user_account>) 

Informational 

  

Radius server assigned 
egress bandwithno limit to Port 

Radius server <server_ip> assigned egress bandwith: no limit to 
Port<portNum> (Account: <user_account>) 

Informational 

  

Radius server assigned 
802.1p default priority: to Port 

Radius server <server_ip> assigned 802.1p default priority: 
<priority 0-7> to Port <portNum> (Account: <user_account>) 

Informational 

  

802.1x Authentication failure 

802.1x Authentication failure from (Username: <user_account>, 
Port <portNum>, MAC: <macaddr>) 

Warning 

  

802.1x Authentication failure 
for the radius server 

802.1x Authentication failure for the radius server <server_ip> 
timeout from (Username: <user_account>, Port <portNum>, 
MAC: <macaddr>) 

Warning 

  

802.1x Authentication failure 
for the 802.1X client session 
timeout 

802.1x Authentication failure for the 802.1X client session timeout 
from (Username: <user_account>, Port <portNum>, MAC: 
<macaddr>) 

Warning 

  

802.1x Authentication success 

802.1x Authentication success from (Username: <user_account>, 
Port <portNum>, MAC: <macaddr>) 

Informational 

 Loopback 

Port  loop occurred 

Port <portNum> LBD loop occurred. Port blocked.     

Critical  

  

Port  loop detection restarted 
after interval time 

Port <portNum> LBD port recovered. Loop detection restarted. 

Informational 

Denial of 

The DoS attack is blocked 

<dos_name> is detected from (IP: <ipaddr> Port: <portNum>) 

Critical 

Summary of Contents for DES-1228/ME






























































































































































































































































































































































































































Reviews:

No comments

Related manuals for DES-1228/ME

CALIENT S320 Hardware User'S Manual preview
S320
Brand: CALIENT Pages: 46
CALIENT S320 Getting Started Manual preview
S320
Brand: CALIENT Pages: 42
D-Link TM DES-6500 Command Line Interface Reference Manual preview
TM DES-6500
Brand: D-Link Pages: 267
H3C S3100 Series Command Manual preview
S3100 Series
Brand: H3C Pages: 1089
Dataprobe iBoot-G2 Quick Start Manual preview
iBoot-G2
Brand: Dataprobe Pages: 3
Panasonic AV-HS6000 Operation Manual preview
AV-HS6000
Brand: Panasonic Pages: 206
Hall Technologies EMCEE200 User Manual preview
EMCEE200
Brand: Hall Technologies Pages: 35
AVLT-Power AcePro-CE89-1 Quick Installation Manual preview
AcePro-CE89-1
Brand: AVLT-Power Pages: 12
X10 Anaconda Switcher VK68A User Manual preview
Anaconda Switcher VK68A
Brand: X10 Pages: 2
UfiSpace S9180-32X Hardware Installation Manual preview
S9180-32X
Brand: UfiSpace Pages: 25
Equip Vision 332702 Manual preview
Vision 332702
Brand: Equip Pages: 10
KinAn DPU102 User Manual preview
DPU102
Brand: KinAn Pages: 4
Wavetronix Click 223 Installation preview
Click 223
Brand: Wavetronix Pages: 3
Hamlet XUSB370MS User Manual preview
XUSB370MS
Brand: Hamlet Pages: 2
Lantech IPES-5222T Series User Manual preview
IPES-5222T Series
Brand: Lantech Pages: 30
Black Box LGB408A-R2 Manual preview
LGB408A-R2
Brand: Black Box Pages: 20
Larson Electronics GAU-125V-20A-P Instruction Manual preview
GAU-125V-20A-P
Brand: Larson Electronics Pages: 2
DANLERS ControlZAPP CZ CESR 10VDC Installation Notes preview
ControlZAPP CZ CESR 10VDC
Brand: DANLERS Pages: 2

Brands by name

Popular brands

Load more brands