manualshive.com logo in svg

Cytomedix Angel, Operator'S Manual, Page: 48 / 88

Share
Download
Cytomedix Angel Operator'S Manual Download Page 48

Angel

®

 cPRP System 

Operator’s Manual

3-20

Processing

Close Button 

Touching the Close button will close the Info Screen and return you to 

the previously displayed screen.

Forward/Back Buttons 

The Forward and Back buttons are only present within Info Screens that 

contain animations. These animations are divided into multiple instructional 

steps. The Forward button advances to the next step, while the Back button 

replays the current step or skips back to the previous step.

“Check for new software” Button

Touching the “Check for new software” button will display the New Software Screen 

on the Angel’

® 

cPRP System’s touch screen display. The New Software Screen is 

used to check for, download, and install new versions of the Angel

®

 Concentrated 

Platelet Rich Plasma (cPRP) System’s software. For details on using the New 

Software Screen, refer to the section “New Software” in Chapter 6: Routine Care of 

this manual.

Info Screen

The Info Screen is displayed by touching the Info button from any other screen. 

The Info Screen displays the Angel

®

 cPRP System software version and 

serial number at the top of the screen, as well as context-sensitive help and/or 

instructional animations below (see Figure 3-17).

Figure 3-17 Info Screen

1.  Close Button

2.  Back Button and Forward Button

Processing

3-24

Angel Operator’s Manual

Close Button

Touching the Close button will close the Info Screen and return you to the 

previously displayed End of Case Screen or "Tally" tab.

Up Arrow Button

Touching the Up Arrow button will display the next six newest cases 

(disabled if there are no cases newer than those already displayed).

Down Arrow Button

Touching the Down Arrow button will display the next six older cases 

(disabled if there are no cases older than those already displayed).

Output Screen

The Output Screen is displayed by touching the "Output" button and is used to 

save either a case tally table or a case log to a connected USB storage device.

In addition the "Output" button allows the operator to save a case log to 

a network

server through the Angel ’s Ethernet port (see  Figure 3-19).

For detailed instructions on how to save case tally tables and logs, refer to “Saving 

Case Data” on page 3-5.

Figure 3-19    Output Screen

1

1 Close button
2 Up  Arrow  button
3 Down  arrow  button

2

3

Summary of Contents for Angel

























































































Reviews:

No comments