manualshive.com logo in svg

Cytomedix Angel, Operator'S Manual, Page: 20 / 88

Share
Download
Cytomedix Angel Operator'S Manual Download Page 20

Angel

®

 cPRP System 

Operator’s Manual

2-1

Installing the Disposables

The Angel

®

 cPRP Processing Set consists of a pre-connected variable volume 

separation chamber, a tubing set with a platelet sensor/valve assembly, and 

a three-compartment reservoir bag for the collection of blood products (whole 

blood, red blood cells, and platelet poor plasma). The Angel

®

 cPRP Processing 

Set also contains a 20 ml luer lock syringe for the collection of platelet rich 

plasma (PRP), two 60 ml specimen cups for use in a sterile field, a whole 

blood bag spike adapter, male-female luer plugs, and labels for collected blood 

components.

Major Components

(see Figure 2-1)

Variable Volume Separation Chamber: The Angel

®

 cPRP Processing Set 

utilizes a variable volume separation chamber that can process from 40 ml 

– 180 ml of anticoagulated autologous whole blood or mixture of blood and 

bone marrow in a single cycle. The Angel

®

 cPRP Processing Set is capable of 

processing up to three (3) cycles per disposable.

The top half of the variable volume separation chamber (the hard plastic 

component) is the separation chamber plate. The separation chamber plate is 

used to seat the variable volume separation chamber in the centrifuge.

Platelet Cuvette/Valve Assembly: The platelet cuvette/valve assembly contains 

three major components: (1) the platelet cuvette, (2) the pump loop tubing and 

(3) the rotating valve. The platelet cuvette is seated in the platelet sensor and is 

used to optimize the collection of the separated blood components. The pump 

loop tubing is inserted around the pump, which moves volume from the whole 

blood compartment of the three-compartment reservoir bag to the variable volume 

separation chamber and from the variable volume separation chamber to the 

various collection compartments for the separated blood products (PRP, PPP and 

RBC). The rotating valve rotates throughout the course of the processing cycle 

to direct the whole blood, the mixture of blood and bone marrow, or its separated 

components through the appropriate pathway.

The platelet cuvette/valve assembly has been designed so that the operator can 

easily install the platelet cuvette/valve assembly while insuring that the platelet 

cuvette is properly seated in the platelet sensor and that the rotating valve is 

properly seated on the valve assembly driver.

Angel

®

 cPRP Processing Set

Description

Chapter 2: Installing the Disposables

Summary of Contents for Angel

























































































Reviews:

No comments