Angel
®
cPRP System
Operator’s Manual
3-16
Processing
The topmost line of the End of Case Screen consists of the following information,
from left to right: a sequential case number assigned by the machine to each
case, the serial number of the Angel
®
Concentrated Platelet Rich Plasma (cPRP)
System, and the date and time at which the case was started.
The next lines are three fields: “ID”, “Operator”, and “Notes”. All three fields will
be blank until their values are assigned using the “ID” button, “Operator” button,
and “Notes” button located towards the bottom of the screen. To learn how to
enter values for these fields, which will appear in saved tally tables, refer to the
section “Entering Optional Case Data Fields” on page 3-6.
The tally table in the center of the End of Case Screen displays the total volume
of whole blood or mixture of blood and bone marrow processed in the first column,
followed by the total volumes of RBC, PPP, and PRP collected in each cycle. The
totals at the bottom of each column reflect the volumes of the entire case.
The six buttons near the tally table are used for entering case information, and for
displaying and saving cases. To learn how to do this, refer to the section “Saving
Case Data” on page 3-5. The buttons’ functions are described below.
“Past Cases” Button
Touching the “Past Cases” button will bring up the Past Cases
Screen. From the Past Cases Screen, past cases may be selected
for viewing or saving. To learn how to select past cases for viewing or saving,
refer to “Selecting Past Cases” on page 3-8. For a detailed explanation of the
Past Cases Screen, read “Past Cases Screen” on page 3-21.
“Output” Button
Touching the “Output” button will bring up the Output Screen. From the
Output Screen, case data may be saved to an external storage device.
To learn how to save case data, refer to “Saving Case Data” on page 3-5. For a
detailed explanation of the Output Screen, read “Output Screen” on page 3-22.
Processing
Angel Operator’s Manual
3-17
End of Case Screen
The End of Case Screen appears at the end of each case and displays
information about the case (see Figure 3-13). From the End of Case
Screen, the operator may save case data to an external USB
storage device.
See “Running the Separation Process” on page 3-2 for instructions on
unloading the Angel Whole Blood Separation Processing Set .
Figure 3-13 End of Case Screen
The topmost line of the End of Case Screen consists of the following information,
from left to right: a sequential case number assigned by the machine to each
case, the serial number of the Angel Whole Blood Separation System, and the
date and time at which the case was started.
The next lines are three fields: “ID”, “Operator”, and “Notes”. All three fields will be
blank until their values are assigned using the "ID" button, "Operator" button, and
"Notes" button located towards the bottom of the screen. To learn how to enter
values for these fields, which will appear in saved tally tables, refer to the section
“Entering Optional Case Data Fields” on page 3-6.
The tally table in the center of the End of Case Screen displays the total volume of
whole blood processed in the first column, followed by the total volumes of RBC,
PPP, and PRP collected in each cycle. The totals at the bottom of each column
reflect the volumes of the entire case.
The six buttons near the tally table are used for entering case information, and for
displaying and saving cases. To learn how to do this, refer to the section “Saving
Case Data” on page 3-5. The buttons’ functions are described below.
Figure 3-13 End of Case Screen