CYP CDPS-CS6, Operation Manual

Page: 15 / 32

10
500ms for Telnet commands to ensure that the command is properly
received and executed before the next command is sent.
„
Delete Command: Clicking on the delete command icon ( ) will
delete the command.
„
Add Command: To add a new command to the end of the execution
list, click on the “Add” button. The “Command Select” window will open
where you can select one of the pre-defined commands from the list.
After selecting a command the “Set Destination” window will open to
allow the selection of the delay and target interface for the command.
6.6.2 Extension Macro Tabs 1~3
Click on any of the three “Extension Macro” tabs to execute/edit the 24
additional software-only macro buttons. These macros can only be activated
via the WebGUI or Telnet. Extension Macro editing is identical to editing
macros 1 through 8, please refer to section 6.6.1 for more details.