CYP CDPS-CS6, Operation Manual

Page: 16 / 32

11
6.6.3 Command Settings Tab
The “Command Settings” tab provides a way to create, edit or delete the
commands used by macros. Each command is composed of standard ASCII
or HEX data and represents either a system command, relay command, IR
code, or telnet/serial port command.
Note: The number of commands that can be stored in the unit is limited
by memory and it is generally recommended that commands be under
128 characters long (including spaces). However, if longer commands are
needed there is limited support for commands up to 512 characters long. In
this case the number of (up to) 512 character commands is limited to 32 and
the remaining 96 commands must be under 128 characters.
1) Edit Command: Clicking on the “Edit” button will open up the “Command
Edit” window which provides a way to define the contents of each
individual command. Once all changes are satisfactory, click on the “Save
Change” button to save them into the unit.
„
Command Label: Assign a name for the command by entering the
text into this field. All commands must have a label.