CynkoMet N-235 Series, Instructions For Use And Operation

Page: 66 / 124

Cynko Met
N-233
66
•
Disconnect the connector of the electrical installation under the
guard, then unfasten guard screws (fig. 15) on both sides of the
machine. Then remove the guard;
Figure 15. Positions of screws for unfastening the guard
•
The drain plug (item 1, fig. 16) found at the bottom of the body serves
to remove oil. Oil from the transmission box is to be removed
immediately after the machine’s operation, when the oil is hot, into
the container intended for this purpose.
•
The vent hole (item 2, fig. 16) situated at the top of the body serves
for filling of the transmission box with oil.
•
The proper oil level can be assessed when the spreader is in
horizontal position by means of the oil level indicator window (item 3,
fig. 16), which is found in the mount of bearings.
•
The indispensable amount of oil is 1.6l.
•
Before replacing the drain plug, clean it of contaminants.
View from top
View from bottom
screws