Cynko
Met
N-233
21
drive system, brakes and signaling lights and hydraulic, pneumatic and
electrical connection elements.
•
Before starting driving, check whether the parking brake is released. The
spreader is adapted for driving on slopes up to a maximum inclination of 8°
.
Moving the spreader on steeper slopes may cause the spreader to tip over
as a result of loss of stability.
•
Each time after finishing work, empty water from the air tank by means of
the drain valve (section 6.3). During frosts, freezing water may cause
damage to components of the pneumatic brake system.
•
It is prohibited to exceed the admissible spreader load. Exceeding the
carrying capacity may lead to equipment damage, loss of stability while
driving, scattering of the load and cause a hazard to third parties during
driving. The brake system of the machine has been adapted to the total
weight of the spreader, which if exceeded will result in a drastic reduction in
the effectiveness of the brake system.
•
The load on the spreader should be distributed evenly and must not
impede driving the set.
•
When reversing, it is recommended to use the assistance of another person.
During maneuvering, the person helping must keep a safe distance from the
danger zones and at all times be visible to the operator of the tractor.
•
If during reversing we are not using the help of a second person, before
commencing the maneuver, make sure that nobody is in the danger zone.
NOTE!
NOTE!
Before each maneuver of reversing and start of spreading the
material loaded on the load box, use of the beep signal 2
times is recommended in the tractor in order to inform
bystanders about the threat.
3.7
Description of residual risk.
Although the "CYNKOMET" Czarna Białostocka
company takes
responsibility for the design and construction in order to eliminate the
danger, and has made every effort to eliminate the risk of an accident, some
elements of risk during operation of the spreader are unavoidable. The
Summary of Contents for N-235 Series
