CynkoMet N-235 Series, Instructions For Use And Operation

Page: 2 / 124

Cynko Met
N-233
2
Comments and observations about the design and operation of the
machine should be sent to the manufacturer. This information will allow
objective evaluation of the machine, and serve as guidelines in their further
modernization.
NOTE!
NOTE!
Before the operation, the user should be familiar with this
manual and follow all recommendations. This will ensure safe
maintenance and trouble-free operation of the machine.
According to the Regulation of the Minister of Infrastructure of 31
December 2002 on the technical conditions of vehicles and obligatory
equipment, the manufacturer announces that the agricultural tractors and
low-speed vehicles, and trailers designed to connect with these vehicles
should be marked with a distinctive plate (section 3.6, figure 3). The plates
are not required when the vehicle is included in the kit and is the last vehicle
in the set.
In accordance with the above Regulation, the manufacturer has
equipped the spreader with a plate holder.
The N-235 spreader complies with the rules of moving on public roads
by machines with a speed of up to 30[km/h] (Act on Road Traffic Law of 20
June 1997). The manufacturer also claims that the supplied spreader cannot
be moved faster on public roads than the above-indicated speed.
If the information contained in the manual will prove to be insufficient
or not fully understandable, it is advisable to seek help at the sales point in
which the machine was purchased or go directly to the manufacturer.
Manufacturer's Address:
CynkoMet Sp. z o.o.
ul. Fabryczna 7W
16- 020 Czarna Białostocka
phone (085) 710 24 56
INSTRUCTIONS FOR USE AND SERVICE CONSTITUTES BASIC EQUIPMENT
OF THE MACHINE!
The machine is designed in accordance with the applicable standards,
documents and legal regulations currently in force.